Instructions / Assembly
AIRTEMPO CONTROL FLUSH MOUNT
Step 1
• Remove the surface mount bayonet from the back of the AirTempo control. The surface
mount bayonet is not used when ush mounting.
Step 2: Remove outside ring from AirTempo control.
NOTE: Be careful not to drop controller when ring pops off
AIRTEMPO FLUSH MOUNT INSTALLATION
IMPORTANT NOTE: Flush mount components
are sold separately (104232RD & 104232SQ).
Contact a MrSteam representative if a ush mount
kit is needed.
Step 3
• Using the template provided, cut the hole in the
desired location. Do not oversize or undersize the
cutout. Ensure the template is level before cutting
the hole.
• Test t the ush mount box to ensure the hole
is the corre size.
• Ensure the mounting surface is clean and dry.
• Apply a thin bead of silicone in the location
shown as required to create a moisture seal.
• Remove and discard the release paper to
expose the adhesive liner.
15
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.