iTempo Installation Manual

mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
14
mr.steam
temp
aroma chroma
time
mr.steam
temp
aroma chroma
time
The iTempoPlus Control features programmable
temperature control, programmable time duration,
clock, AromaSteam, ChromaSteam
®
, ON/OFF and
two personal settings.
Set the steam bathing temperature ac-
cording to personal preference, however it is highly
recommended to begin steam bathing at a low tem-
perature setting for a very short duration to gauge
comfort and safety levels.
POWERING UP THE UNIT Diagram 1
When the generator is first powered up or after a
power interruption, the clock display ashes and the
clock is ready to be set up.
NOTE: Pressing the ON/OFF will start the generator
even if the clock has not been set.
ON/OFF Diagram 2
Press the ON/OFF key to start or stop the ow of
steam. The Temperature Set Point is displayed. Steam
will begin to ow a few minutes after the control is
turned ON. The duration required for the steam room
to reach steam bathing temperatures depends on the
steam room construction and steam generator speci-
cations. Steam may continue to ow for a short time
after the control is turned OFF.
iTempoPlus
™
Operating Instructions
WARNING
!
DIAGRAM 1
DIAGRAM 2
Drawings for Illustrative Purposes Only.