Installation Guide

I N S T A L L E R

OPTIONAL DRIP PAN

Mr. Steam strongly recommends the use of a drip

an in the unlikely event of a plumbing leak.

Locate the drip pan on a solid level surface and

place the steam generator inside the drip pan.

Insure the steam generator is level (see page 4 for

locating the steam generator).

All plumbing shall be performed by a qualified

licensed plumber and in accordance with applicable

national and local codes. Check local plumbing

code for receptor, trap and vent requirements.

Drip pans drain by gravity.

The drip pan is equipped with an integral female

⁄4" NPT fitting.

OPTIONAL EXPRESS STEAM

(only available factory installed)

Available for all MS Models. Express Steam genera-

tors are equipped with a low power heating element

and thermostat to keep the water in the tank warm

enough to bring up steam quicker. All Express Steam

components and wiring are installed at the factory.

No additional wiring or plumbing is required by

installers.

steam

Installation, Operation & Maintenance Manual

__________________________________________________________________________

All drawings are for illustrative purposes only