CT Day Spa Specifications

ManualsBrandsMr. Steam ManualsPlumbingCT9EC1-PC CT9EC1 Day Spa Steam Generator With iTempo Plus Control In Round Polished Chrome

Table Of Contents

steam

Technical Specifications

CT Day Spa Packages

CT DAY SPA SYSTEM

For Models CT6 to CT15

BOX CONTENT

• iTempoPlus

Control

• Matching AromaSteam Steamhead with Acrylic Shield (

not shown)

• AutoFlush

System

• Express Steam

factory installed (

not shown

)

• Drip Pan

• CT-SteamStop

™

• MSTS In-Room Temperature Sensor (

not shown)

CT-PACKAGE ISTEAM

For Models CT6 to CT15

BOX CONTENT

• Steam Control

• Matching iSteam Steamhead

• AutoFlush

System

• Express Steam

factory installed (

not shown)

• Drip Pan

• CT-SteamStop

™

• MSTS In-Room Temperature Sensor (

not shown)

TS0052 12.14

steam

Sussman-Automatic Corp®

hello@mrsteam.com www.mrsteam.com

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256

9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and

Maintenance Manual or refer to the manual provided with the unit.

MODEL SHAPE FINISH PROJECT INFORMATION



CT DAY SPA



RD Round



PC - Polished Chrome

SYSTEM



SQ Square



BN - Brushed Nickel



PN - Polished Nickel



ORB - Oil Rubbed Bronze



BB - Brushed Bronze



PB - Polished Brass



RAW -

Custom Plating



CT-PACKAGE

N/A



WH -

White

iSteam



BK -

Black

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

Notes:

Summary of content (7 pages)

PAGE 1
mr.
PAGE 2
mr.steam ® T E C H N I C A L S P E C I F I C AT I O N S BOX CONTENTS: iTempoPlus™ CONTROLS iTempoPlus™ controls flush mount in the steam/shower enclosure through a 2 5⁄8” wide x 3 7⁄8” high hole. iTempo controls can also be surface mounted.
PAGE 3
mr.steam ® Technical Specifications iSteam 2.0 Control ® Box Contents: • iSteam® 2.0 Control • Owner’s Manual • Control Cable (30 ft.
PAGE 4
mr.steam ® Technical Specifications AutoFlush ® AutoFlush Shown Fully Assembled Box Contents • AutoFlush Valve with Cord • Installation instructions Operation The optional AutoFlush System feature automatically drains the Mr.Steam® system following each use. A time delay allows the water to cool down (about two hours) before it drains by gravity for a safe and gentle operation.
PAGE 5
mr.steam ® Technical Specifications Drip Pan MS 103867 Mr. Steam strongly recommends the use of a drain pan in the unlikely event of a plumbing leak. Locate the drain pan on a solid level surface and place the steam generator inside the drain pan. Insure the steam generator is level. All plumbing shall be performed by a qualified licensed plumber and in accordance with applicable national and local codes. Check local plumbing code for receptor, trap and vent requirements. Drain pans drain by gravity.
PAGE 6
mr.steam ® Technical Specifications CT-SteamStop ™ BOX CONTENT • CT-SteamStop™ Control Button • Owner’s Manual • 60’ CT-SteamStop Cable FUNCTION • Used to turn the steam room on and off from within the steam room without having to touch the main controller • Works with both iTempoPlus® and iSteam® controls • Adhesive sticker for mounting located on the back of the button (non-supplied silicon is required to properly seal the wall opening). FOR ILLUSTRATIVE PURPOSES ONLY.
PAGE 7
mr.steam ® Technical Specifications MSTS/iMSTS in Room Temperature Sensor BOX CONTENT • MSTS/iMSTS probe with wire attached FUNCTION • Used to accurately read the temperature inside the steam room and send it to the controller. • MSTS is for use with the iTempo® or iTempoPlus® controls • iMSTS is for use with the iSteam® Control 1⁄4" Minimum Silicone Sealant 1⁄ 2" Maximum Probe Finish Wall SECTIONAL VIEW Cable INSTALLED REMOTE TEMPERATURE PROBE FOR ILLUSTRATIVE PURPOSES ONLY.