Owners Manual

ManualsBrandsMr Steam ManualsPlumbingIButler Max Linear Steam Generator Control Kit / Package

The Acrylic Shield (PN 103938 for round and 103938SQ for square)

is for use when acrylic or other non-heat resistant materials are used

for the steamroom enclosure. The Acrylic Shield is to be installed

between the  nished wall and the steamhead.

AROMASTEAM

STEAMHEAD

STEP 1

Attach Locating

Nipple to steam line.

STEP 2

Provide a 1 1/2” diameter

hole in  nished wall to

mount the steamhead.

STEP 3

Remove Locating Nipple

and attach steam head,

with nipple sized for the

 nished wall thickness.

Oil well must be facing up.

NOTE: Steamhead to be installed 6-12” above the

 nished  oor. A 1.5” diameter hole in the steam

room is required to mount the steamhead. Refer

to the MrSteam Installation Manual for additional

installation information.

NOTE: Do not locate the control above or near the SteamHead

WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only

and may have been altered for presentation purposes. NEVER use this document for the Installation, Operation or Maintenance of any MrSteam® product. For installation, operation and

maintenance information and instructions, only use the applicable MrSteam® Installation, Operation & Maintenance Manual(s). The specific Installation, Operation & Maintenance manual

that is supplied with each MrSteam® product contains important information required for the safe and reliable installation and operation of the product. Failure to install any MrSteam®

product according to the applicable manual may result in property damage, an inoperable system/control, or hazardous condition. If you do not have the applicable Installation, Operation

& Maintenance manual please contact MrSteam® for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of

any MrSteam® product please contact a customer or technical service representative using the contact information on the back cover of this guide or consult a properly licensed contractor,

architect and/or design professional.

OIL WELL

STEAM LINE

LOCATING NIPPLE

MRSTEAM

GUIDE