Owners Manual

LINEAR STEAMHEAD
Do not locate the steam
head in any location where
the steam emission zone
is near a seat, bench, or
any space occupied by any
persons. for a diagram of the
steam emission zone.
For Illustrative purposes
only. Consult with qualified
designer, architect or
contractor for steamroom
construction details.
STUD
CEMENT BOARD
THIN SET
FINISHED
SURFACE
SILICONE
STEAM OUTLET
FACE
NOTE: STEAMHEAD TO BE INSTALLED 6-12”
ABOVE THE FINISHED FLOOR. REFER TO THE
MR. STEAM INSTALLATION MANUAL FOR
ADDITIONAL INSTALLATION INFORMATION.
WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only
and may have been altered for presentation purposes. NEVER use this document for the Installation, Operation or Maintenance of any MrSteam® product. For installation, operation and
maintenance information and instructions, only use the applicable MrSteam® Installation, Operation & Maintenance Manual(s). The specific Installation, Operation & Maintenance manual
that is supplied with each MrSteam® product contains important information required for the safe and reliable installation and operation of the product. Failure to install any MrSteam®
product according to the applicable manual may result in property damage, an inoperable system/control, or hazardous condition. If you do not have the applicable Installation, Operation
& Maintenance manual please contact MrSteam® for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of
any MrSteam® product please contact a customer or technical service representative using the contact information on the back cover of this guide or consult a properly licensed contractor,
architect and/or design professional.
33 MRSTEAM
®
GENERAL GUIDE