Owners Manual

SHOWER SEAT
STEP 1
Mount the WallSeat on a suitable surface
like tile, granite or marble. Mount the
seat at a height above the  oor
according to personal
preference.
STEP 2
Using the template
provided, drill four
pilot holes into the
header and 4 clearance
holes into the tile. Use a
level to ensure pilot holes
are level. Be precise.
Do not oversize or undersize the pilot
holes. Drill the pilot holes to the full 3” depth
(length of the screws).
Fill the mounting holes with silicone (provided) before
mounting the brackets to the wall as required to prevent
moisture from penetrating into the wall and/or wall cavity.
THICK WALL
THICK TILE
CEMENT
BOARD
BRACKETS OPENING
FACING UP
17 1/32”
with hole hinge pin
on the right side
Max. 1 1/8”
Min. 1/4”
Min. 1/2”
with hole hinge pin
on the left side
STEP 3
Correctly position and mount the left and right
brackets to the wall using the four #12 x 3” screws
provided for correct positioning of both brackets. Do
not over or under tighten the screws (Figure 1).
WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only
and may have been altered for presentation purposes. NEVER use this document for the Installation, Operation or Maintenance of any MrSteam® product. For installation, operation and
maintenance information and instructions, only use the applicable MrSteam® Installation, Operation & Maintenance Manual(s). The specific Installation, Operation & Maintenance manual
that is supplied with each MrSteam® product contains important information required for the safe and reliable installation and operation of the product. Failure to install any MrSteam®
product according to the applicable manual may result in property damage, an inoperable system/control, or hazardous condition. If you do not have the applicable Installation, Operation
& Maintenance manual please contact MrSteam® for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of
any MrSteam® product please contact a customer or technical service representative using the contact information on the back cover of this guide or consult a properly licensed contractor,
architect and/or design professional.
For Illustrative purposes only. Consult with qualified designer, architect or contractor
for steamroom construction details.
LEFT BRACKET
RIGHT BRACKET
FIGURE 1
42MRSTEAM
®
GUIDE