Owners Manual

19
3/4”
1
11/16
”
15
5/16”
14
7/8”
STEP 5
If the seat is not parallel to the  oor when it is in the
lowered or seated position use the allen wrench provided
to adjust both level screws so the wallseat is parallel to
the  oor and it contacts both brackets at the same time
(Figure 3).
STEP 4
Insert seat assembly to brackets. Place seat with
the MrSteam logo on the bottom. Insert hinge pins to
both left and right brackets while the seat assembly is in
vertical position. Securely tighten both hinge pins, using
Allen wrench provided (Figure 2).
FIGURE 2
FIGURE 3
FIGURE 4
LEVEL
SCREW
WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only
and may have been altered for presentation purposes. NEVER use this document for the Installation, Operation or Maintenance of any MrSteam® product. For installation, operation and
maintenance information and instructions, only use the applicable MrSteam® Installation, Operation & Maintenance Manual(s). The specific Installation, Operation & Maintenance manual
that is supplied with each MrSteam® product contains important information required for the safe and reliable installation and operation of the product. Failure to install any MrSteam®
product according to the applicable manual may result in property damage, an inoperable system/control, or hazardous condition. If you do not have the applicable Installation, Operation
& Maintenance manual please contact MrSteam® for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of
any MrSteam® product please contact a customer or technical service representative using the contact information on the back cover of this guide or consult a properly licensed contractor,
architect and/or design professional.
43 MRSTEAM
®
GUIDE