Owners Manual

WATER
FEED
STEAM
OUTLET PIPE
MANUAL
DRAIN LINE
1. Connect to cold
water line.
2. Provide a shut off
valve, and a copper
or brass union on the
water supply line.
3. Flexible copper tubing, braided
hose, PVC or PEX if permissible by
local codes.
1. Provide a 1/2” copper or
brass union on steam line.
2. Pitch steam line
1/4” per foot towards
steam head or steam
generator to avoid
valleys and trapping of
condensate.
1. Drain ( 1/2” NPT).
2. Unit drains by gravity.
3. Provide 1/2” copper
or brass union.
NOTE: Running the steam line down and then up will create a steam
trap blocking the  ow of steam.
NOTE: A drain valve is provided to facilitate
servicing. Provide a drain line connection from
steambath generator drain valve according to National and
local Codes. Check local plumbing code for receptor, trap and vent
requirements.
WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only
and may have been altered for presentation purposes. NEVER use this document for the Installation, Operation or Maintenance of any MrSteam® product. For installation, operation and
maintenance information and instructions, only use the applicable MrSteam® Installation, Operation & Maintenance Manual(s). The specific Installation, Operation & Maintenance manual
that is supplied with each MrSteam® product contains important information required for the safe and reliable installation and operation of the product. Failure to install any MrSteam®
product according to the applicable manual may result in property damage or an inoperable or hazardous condition. If you do not have the applicable Installation, Operation & Maintenance
manual please contact MrSteam® for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam®
product please contact a customer or technical service representative using the contact information on the back cover of this guide or consult a properly licensed contractor, architect and/
or design professional.
WATER FEED LINE
(3/8” NPT)
STEAM OUTLET PIPE
(1/2” NPT)
MANUAL DRAIN VALVE
(1/2” NPT)
(SHOWN IN OPEN POSITION)
PITCH AS
REQUIRED FOR
GRAVITY DRAIN
7 MRSTEAM
®
GUIDE