Installation Guide

mr
.
steam
®
AromaSteam Operation and Installation Instructions
_____________________________________________________________________________________________
INSTALLER SECTION
12
chroma
timetemp
aroma
aroma
timetemp
chroma
AromaSteam
Button
AromaSteam
Button
OPERATION
Powering Up the Pump
IMPORTANT NOTE: This step only needs to be performed
during installation.
1. The pump needs to be turned on before it can be used
2. Press and hold the power button for 3 seconds.
The LED will turn on solid red.
Activating the Pump from a Control
Air Tempo
®
Control
1. Press the ON/OFF button to turn the steam generator ON.
2. Press the AROMA button, AROMA will be displayed on the screen
when AromaSteam is on.
3. Aroma fragrance will automatically be pumped into the steam line at
preset intervals.
iSteam
®
Control
1. Press the START button to turn the steam generator on.
2. In the dashboard press the AROMA button, the button
will be highlighted when AromaSteam Pump is on.
3. Aroma fragrance will automatically be pumped into the steam line
at preset intervals.
iTempoPlus
®
Control
1. Press the ON/OFF button to turn the steam generator ON.
2. Press the AROMA button, AROMA will be displayed on the screen
when AromaSteam is on.
3. Aroma fragrance will automatically be pumped into the steam line at
preset intervals.
PUMP LED LIGHT: KEY:
Flashing Green LED Pump is OFF. Press and hold the power button for 3 seconds to turn the pump
on.
Solid Red Pump is ON, but has not been activated. To activate the pump, turn your steam
generator ON from the in-shower control and press the aroma button.
Solid Green LED Pump is on and has been activated from the in-shower control.
The LED will turn off each time the pump injects fragrance into the steam line.
Adjusting the Amount of Fragrance Delivery
The AromaSteam system has been factory set to deliver a suitable amount of aromatic
fragrance into a typical sized steam room. Do not exceed the maximum setting. Please
contact the MrSteam Technical Service Department before changing this setting.
Contact the MrSteam Technical Service Dept. at (800) 76-STEAM (East coast)
or (800) 72-STEAM (West Coast) for assistance or additional information.
Increasing the settings may introduce excessive concentration of
fragrance into the steam room, resulting in a health hazard.
Fragrance
Setting Knob
Power Button
LED Light
Rev C
WARNING
!
101
F
1 2:16
PM
AROMA
AromaSteam
Button