Owners Manual

WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only
and may have been altered for presentation purposes. NEVER use this document for the Installation, Operation or Maintenance of any MrSteam® product. For installation, operation and
maintenance information and instructions, only use the applicable MrSteam® Installation, Operation & Maintenance Manual(s). The specific Installation, Operation & Maintenance manual
that is supplied with each MrSteam® product contains important information required for the safe and reliable installation and operation of the product. Failure to install any MrSteam®
product according to the applicable manual may result in property damage, an inoperable system/control, or hazardous condition. If you do not have the applicable Installation, Operation
& Maintenance manual please contact MrSteam® for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of
any MrSteam® product please contact a customer or technical service representative using the contact information on the back cover of this guide or consult a properly licensed contractor,
architect and/or design professional.
iSTEAM
®
3 CONTROL
INSTALLATION
STEP 1
PLUG the 30’ control cable into the
iSteam
®
3 control pigtail (1A). Turn the
generator on and test the control to
verify proper function.
Install rough-in box in desired control
location.
Use rough-in box provided as a guide to
cut hole in  nished wall.
IMPORTANT NOTE: Turn power to the steam
generator OFF before installing the control.
Failure to turn the power off will result in an
inoperable control.
CAUTION: DO NOT FORCE OR TWIST
CABLE CONNECTOR INTO THE
RECEPTACLE. FORCING OR TWISTING
MAY DAMAGE THE CONNECTORS.
CONTROL
PIGTAIL
CONTROL
CABLE
1A
17 MRSTEAM
®
GUIDE