Instructions / Assembly
21
AROMASTEAM STEAMHEAD INSTALLATION
AROMASTEAM
™
STEAMHEAD AND
OPTIONAL ACRYLIC SHIELD INSTALLATION
NOTE: Steamhead to be installed 6-12” above the finished floor. A 1.5” diameter hole in the steam
room is required to mount the steamhead. Refer to the Mr.Steam Installation Manual for additional
installation information.
The Acrylic Shield (PN 103938SQ or PN 103938 ) is for use when acrylic or other non-heat resistant
materials are used for the steamroom enclosure. The Acrylic Shield is to be installed between the
finished wall and the steamhead.
Step 1
Attach Locating Nipple
to steam line.
Step 2
Provide a 1 1/2” hole in
nished wall to mount
the steamhead.
Step 3
Remove Locating Nipple
and attach steam head,
with nipple sized for the
nished wall thickness.
Oil Well
For Illustrative purposes only. Consult with qualified designer,
architect or contractor for steamroom construction details.
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.