Operating Guide

ManualsBrandsMr Steam ManualsTowel WarmersW500PC

steam

towelwarmers Electric Models

_________________________________________________________________

Installation and Operating Instructions

HOMEOWNER:

__________________________________________

THANK YOU for selecting Mr.Steam Towel Warmer, the perfect

addition to bathrooms, family spas, and exercise rooms within

your home. Our products have long been a standard for quality

and comfort, and we are sure that you will experience contin-

ued enjoyment from the Towel Warmer you have purchased by

following these simple instructions.

TOWEL WARMERS ARE HOT! The Towel

Warmer is an electrical heating appliance, intended only for

indoor residential applications and, as such, should be

installed and used with certain precautions for your safety.

1. INSTALLATION PROCEDURES FOR PERMANENTLY-WIRED

WALL-MOUNTED UNITS MUST BE ACCOMPLISHED BY

QUALIFIED PERSONNEL IN STRICT ACCORD WITH

APPLICABLE NATIONAL AND LOCAL BUILDING AND

ELECTRICAL CODES.

2. DO NOT place TOWEL WARMER units inside a shower, sauna

or steam room enclosure or any other wet location or with

elevated temperatures.

3. CAUTION is advised when Towel Warmer is accessible to

children.

4. For the ultimate ease in use, a dedicated wall switch or

timer can be used to control the TOWEL WARMER unit.

Contact Mr.Steam for an in-wall 24-hour-7 day timer

(PN W-103588) Note: All switches and control devices must

be installed on the load (black) side of the Towel Warmer

circuit in compliance with the National Electric Code and

Local Codes. (see page 11 for installation instructions)

IMPORTANT:

The finish of your Towel Warmer can be

protected and maintained by an occasional wiping with a soft,

non-abrasive, damp cloth and lightly polished, thereafter, with

a soft dry cloth when the Towel Warmer is cold. Under no cir-

cumstances should abrasive cleaning powders, metal polish or

chlorine-based cleaners be used on any part of this product.

IMPORTANT:

This appliance is intended for towels washed

in water. Fabrics that contain soap or detergent residue may

show what appears to be scorch marks. However this is simply

the discoloration of the residue. The Towel Warmer unit does

not reach sufficient temperature to scorch fabric. We are not

responsible for discoloring or damage of any fabrics.

This picture shows the recommend

method of draping a towel on a towel

warmer. Ensure as much as possible of

the towel's surface is touching the

towel warmer to ensure fast even warm-

ing of the towel.

TOWEL WARMER SPECIFICATIONS

_____________________________________________________________

Model No. Dimensions (inches) Amps Volts/Phase Weight (lbs.)

W x H x D

_____________________________________________________________

W500 22.5 x 25 x 5 0.83 120/1 20

_____________________________________________________________

W510 20.5 x 18.5 x 5 0.58 120/1 20

_____________________________________________________________

W542 23.75 x 26 x 5.25 1.25 120/1 25

_____________________________________________________________

W552 23.5 x 25.25 x 13 1.67 120/1 40

_____________________________________________________________

W554 23.75 x 21.5 x 13 1.67 120/1 30

_____________________________________________________________

W556 21.75 x 34 x 10 1.25 120/1 25

_____________________________________________________________

W562 23.5 x 23.25 x 5.25 1.67 120/1 30

_____________________________________________________________

W572 23.75 x 36 x 5.25 1.25 120/1 30

_____________________________________________________________

W634 19.5 x 27.5 x 7.25 1.67 120/1 25

_____________________________________________________________

W842 23 x 24.5 x 4.75 0.83 120/1 25

_____________________________________________________________

W856 21.5 x 31 x 9.875 1.25 120/1 30

_____________________________________________________________

INSTALLER:

_________________________________________________________

READ THIS ENTIRE INSTRUCTION MANUAL THOROUGHLY BEFORE BEGINNING

INSTALLATION. LEAVE THESE INSTRUCTIONS WITH HOMEOWNER.

BE CERTAIN ELECTRICITY IS SHUT OFF AT MAIN PANEL

BEFORE WIRING OR SERVICING YOUR TOWEL WARMER. Follow instructions

to make certain your Towel Warmer is properly attached to the wall. FAIL-

URE TO FOLLOW THESE STEPS COULD RESULT IN HAZARDOUS CONDITIONS.

To avoid possible fire hazard, the Towel Warmer must

remain in its intended position. MOUNT THIS UNIT ONLY AS SHOWN IN

THESE INSTRUCTIONS.

1. Install in accordance with

National and local codes.

2. Do not locate in shower stall or

near shower spray.

3. Do not locate within the show-

er or tub zone.

4. All models are to be protected by dedicated

and suitably rated GFCI circuit breaker or equal.

TO ENSURE CORRECT OPERATION OF YOUR TOWEL WARMER, PLEASE FOLLOW

ALL THE INSTRUCTIONS CAREFULLY, OBSERVING THE "CAUTION" NOTATIONS

FOR EACH STEP.

Inspect Towel Warmer

Unpack the Towel Warmer carefully to avoid any damage or loss of any part.

When opening the box be sure that the parts are not accidentally discarded.

Towel Warmers are shipped in specially designed shipping cartons. The entire

surface of the Towel Warmer is hand-wrapped to protect the finish. It is your

responsibility to immediately inspect for any damage.

For illustrative purposes only

WARNING

CAUTION

Shower/Tub

Zone

Do not locate the

towel warmer within

the shower/tub zone