Use and Care Manual
7
•Adjust the air flow direction properly, otherwise
it might cause discomfort or cause uneven room
temperatures.
•Adjust the horizontal louver using the remote
control.
•Adjust the vertical louver manually.
Adjusting vertical air flow(Up--Down)
Perform this function while the unit is in operation.
Use the remote control to adjust the vertical air
flow direction. The horizontal louver can move
slightly for each press, or continuously swing up
and down automatically. Please refer to the
“REMOTE CONTROL USER MANUAL” for details.
Adjusting horizontal air flow (left - right)
•Move the deflector rod manually to adjust the air
flow in the direction you prefer.
IMPORTANT: Do not put your fingers into the panel of
the blower and suction side.The high-speed fan inside
may cause injury.
CAUTION
•Do not operate the air conditioner for long
periods with the air flow direction set downward
in cooling or dehumidifying mode. Otherwise,
condensation may occur on the surface of the
horizontal louver causing moisture to drop on to
the floor or on furnishings.
•After a quick restart, the horizontal louver may
remain static for approximately 10 seconds.
•Open angle of the horizontal louver should not be
set too small, as COOLING or HEATING
performance may be reduced due to too
restricted air flow area.
•Do not move the horizontal louver manually,
otherwise the horizontal louver will be out of sync.
But if this happens, please cease operating,
unplug power for a few seconds,then restart the
air conditioner.
Range
Range
Deector rod
Airflow directional control
OPERATING INSTRUCTIONS