Please read this manual carefully before operation and keep it for future reference. Remote Control Manual Advantage Series For more information visit www.mrcool.com.
REMOTE CONTROL SPECS Model RG51M5/(C)EU, RG51M1/EU1 Rated Voltage 3.0V(Dry batteries Lr03 x2) Transmission Distance 8m Environment 23°F~140°F PERFORMANCE FEATURES 1. Operating Mode: AUTO COOL DRY HEAT(Cooling only model without) and FAN. 2. Timer Setting Function in 24 hours. 3. Indoor Setting Temperature Range: 62°F~86°F. 4.
REMOTE BUTTONS FEATURE BREAKDOWN 1. TEMP Button : Push this button to decrease the indoor temperature setting in 1°F increments to 62°F. 2. TEMP Button : Push this button to increase the indoor temperature setting in 1°F increments to 86°F. Note: Press and hold and buttons together for 3 seconds will alternate the temperature display between the °C & °F scale. 3.
REMOTE BUTTONS FEATURE BREAKDOWN 12. TIMER OFF Button: Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10h, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0.0 13.
DISPLAY SCREEN BREAKDOWN 6. TIMER DISPLAY Indicator: This display area shows the settings of the TIMER. That is, if only the starting time of operation is set, it will display the TIMER ON. If only the turning off time of operation is set, it will display the TIMER OFF. If both operations are set, it will show TIMER ON-OFF which indicates you have chosen to set both the starting time and off time. 7. FAN SPEED Indicator: Press the FAN SPEED button to select the desired fan speed setting (Auto-Low-Med-High).
OPERATING THE REMOTE AUTOMATIC OPERATION Switch on the power and the OPERATION indication lamp on the display panel of the indoor unit starts flashing, and turns off after flashes for 6 times. 1. Use the MODE button to select AUTO. 2. Push the TEMP button to set the desired temperature within a range of 62°F ~ 86°F. 3. Push the ON/OFF button to start the air conditioner. The OPERATION lamp on the display panel of the indoor unit lights.
DISPLAY SCREEN BREAKDOWN TIMER Operation Push TIMER ON button to set the auto-on time and TIMER OFF button to set the auto-off time. 1. To set the starting time. 1.1 Push the TIMER ON button, then the remote controller shows TIMER ON , the last set time for the starting operation and the signal "h" will be shown on the DIGITAL DISPLAY area. You are now ready to reset the time to START the operation. 1.2 Push the TIMER ON button again to set desired unit start time. 1.
NOTICE 1. Be sure there are no obstacles between the remote controller and the receiver of indoor unit otherwise the air conditioner will not work. 2. Keep the Remote Controller away from any liquids. 3. Protect the remote controller from the high temperatures and exposure to radiation. 4. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction. 5. Keep Remote Controller away from EMI(Electro-Magnetic Interference) supplied by other household appliances.
Advantage Series The design and specifications are subject to change without prior notice. Consult with the sales agency or manufacturer for details. For more information visit www.mrcool.com.
