DIY Series
CONTENTS Remote Controller Specifications CONTENTS Model Rated Voltage Remote controller Specifications................................................... 2 Operation buttons ......................................................................... 3 Indicators on LCD .......................................................................... 6 How to use the buttons ................................................................. 7 Auto operation...................................................
Operation of buttons Operation of buttons 7 UP Button 1 2 ON/OFF Button This button turns the air conditioner ON and OFF. 1 2 3 4 5 6 ON/OFF SILENCE FP MODE TEMP TIMER OFF FAN SLEEP TURBO TIMER ON SELF CLEAN SWING DIRECT LED FOLLOW ME 3 8 9 10 11 12 COOL DRY HEAT 13 14 NOTE Temperature contol is not available in Fan mode. FAN FAN Button Used to select the fan speed in four steps: AUTO LOW MED HIGH NOTE: You can not switch the fan speed in AUTO or DRY mode.
Operation of buttons 10 TIMER OFF Button Press this button to initiate the auto-off time sequence. Each press will increase the auto -timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the autotimed program, simply adjust the auto-off time to 0.0 Indicators on LCD Information are displayed when the remote controller is powered up.
How to use the buttons How to use the buttons Dehumidifying operation Ensure the unit is plugged in and power is on. The OPERATION indicator on the display panel of the indoor unit starts flashing. 1. Press the MODE button to select DRY mode. 2. Press the UP/DOWN buttons to set the desired temperature. The temperature can be set within a range of 62OF~ 86OF in 1 OF increments. Auto operation Ensure the unit is plugged in and power is on.
How to use the buttons Timer operation Pressing the TIMER ON button can set the auto-on time of the unit. Pressing the TIMER OFF button can set the auto-off time . To set the Auto-on time. ON/OFF SILENCE FP MODE TIMER ON TEMP TIMER OFF FAN SLEEP TURBO SELF CLEAN SWING DIRECT LED FOLLOW ME 1 2 1. Press the TIMER ON button. The remote control shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area.
How to use the buttons How to use the buttons TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. Example: To stop the air conditioner in 10 hours. 1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "H" will show on the display area. 2.
Handling the remote controller Location of the remote controller. 8m Use the remote control within a distance of 8m(26.25 ft.) from the appliance, pointing it towards thereceiver. Reception is confirmed by a beep. CAUTIONS The air conditioner will not operate if curtains, doors or other materials block the signals from the remote control to the indoor unit. Prevent any liquid from falling into the remote c ontrol. Do not expose the remote control to direct sunlight or heat.