Remote Control Manual

7
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the display
panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired
temperature. The temperature can be set within a
range of 62°F~86°F in 1°F increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE:
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating by
sensing the difference between the actual ambient
room temperature and the setting temperature on
the remote control.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you, the
desired mode can be selected manually.
Cooling/Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT
(cooling & heating models only) or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can be set
within a range of 62°F~86°F in 1°F increments.
3. Press the FAN button to select the fan speed in
four steps- Auto, Low, Med, or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE:
In the FAN mode, the setting temperature is not
displayed in the remote control and you are not able
to control the room temperature either. In this case,
only step 1, 3 and 4 may be performed.
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
ECO
ON/OFF
TIMER OFF
RESET LOCK
O
SET TEMPERATURE ( F)
SWING
LED
DISPLAY
TURBO
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
ECO
ON/OFF
TIMER OFF
RESET LOCK
O
SET TEMPERATURE ( F)
SWING
LED
DISPLAY
TURBO
4
3
3
1
1
2
2
2
2
How to use the buttons
For more details visit www.MrCool.com