Troubleshooting Guide
 Troubleshooting 9 
4.  Information Inquiry
•   To enter information inquiry status, complete the following procedure within 10 seconds:
•   Press LED 3 times.
•   Press SWING 3 times.
•   Finish 1 and 2 within 10 seconds, you will hear beeps for two seconds, which means the unit goes into parameter
checking mode.
•   Use the LED (or DO NOT DISTURB) and SWING (or AIR DIRECTION) buttons to cycle through information displayed.
•   Pressing LED (or DO NOT DISTURB) displays the next code in the sequence. Pressing SWING (or AIR DIRECTION)
will show the previous.
•   The following table shows information codes. The screen displays this code for 1.2 seconds, then the information for 
25 seconds.










