Lighting Facts

ManualsBrandsMRCOOL ManualsAir ConditionersSignature 2.5-Ton 28,800-BTU 15.5 SEER Horizontal Complete Split System Air Conditioner with 80% AFUE Gas Furnace

EVAPORATOR COILS

PRODUCT SPECIFICATIONS

Page 1

EVAPORATOR COILS FEATURES

• Microban® antimicrobial additive in the drain pan to resist mold and

mildew growth.

• Aluminum tubing, hairpins, distributors and header tubes. Copper

refrigerant connections for easy brazing to both liquid and suction

lines.

• Preformed ﬂanges in outlet for quick and easy plenum connections

• One of the lowest water retention drain pans in the industry to

minimize mold and mildew growth.

• Interlocking door assemblies and snug line seal grommets to

minimize air leakage

• Foil-face insulation for easy cleaning

• Tubing located at door split for easy coil service or cleaning

• All drain pans are compatible with UV lights

• All piston coils are compatible with R22 or R410a

• 10-year limited parts warranty available when applied with a system.

See limited warranty document for details.

Upﬂow/Counterﬂow Coils

WARRANTY

10 year limited parts warranty available when applied with a

system. See limitied warranty document for details.

MCVP*NPA (Cased)

• External cabinet mounted distributor body designed for easy changing of oriﬁce sizes and fast TXV connections

• Single protruding right side dual drain port for easy installation and service access.

Horizontal Coils

MCHP*NPA (Cased)

• Dedicated horizontal

• Insulated galvanized steel case with durable embossed ﬁnish

• Removable panels provide access to coil.

• Refrigerant lines extend outside of the cabinet for easy connection.

Downﬂow Coils

MCDP*NPA (Cased)

• Heavy-gauge steel constructed cabinet for optimal support of the furnace, no

need for additional bracing or structure.

• Inlet openings matched to furnace models for easy installation and no adapters

needed*

• Removable Cabinet panels for easy coil service

• Single protruding dual drain port for easy installation and service access

mrcool.com

Summary of content (6 pages)

PAGE 1
EVAPORATOR COILS PRODUCT SPECIFICATIONS EVAPORATOR COILS FEATURES • Microban® antimicrobial additive in the drain pan to resist mold and mildew growth. • Aluminum tubing, hairpins, distributors and header tubes. Copper refrigerant connections for easy brazing to both liquid and suction lines. • Preformed ﬂanges in outlet for quick and easy plenum connections • One of the lowest water retention drain pans in the industry to minimize mold and mildew growth.
PAGE 2
EVAPORATOR COILS MCHP*NPA | MCVP*NPA | MCDP*NPA MODEL NUMBER GUIDE M C V P 24 A N P A SERIES METERING DEVICE O = ORIFICE, T = TXV C = CAPILLARY, P = PISTON REFRIGERANT N = R410 , R = R-22 COIL DIMENSION A = 14.5 , B = 17.5 , C = 21 , D = 24.5 MRCOOL C = COIL AIR FLOW M = UPFLOW/HORIZONTAL V = UPFLOW H = HORIZONTAL NOMINAL CAPACITY 42 = 3.5 TON 18, 19 = 1.5 TON 43 = 3.5/4.0 TON 23, 24 = 2.0 TON 48, 49, 50 = 4.0 TON 29, 30 = 2.5 TON 60, 61, 62 = 5.0 TON 35, 36 = 3.
PAGE 3
EVAPORATOR COILS MCHP*NPA | MCVP*NPA | MCDP*NPA MCDP* COIL PRESSURE DROP Wet Coil Pressure Drop Evaporator 600 800 1000 1200 1400 1600 1800 2000 MCDP0018ANPA 0.20 0.32 0.42 0.52 MCDP0024ANPA 0.15 0.25 0.37 0.52 MCDP0024BNPA 0.15 0.26 0.39 0.54 MCDP3036ANPA 0.10 0.18 0.27 0.38 0.49 MCDP3036BNPA 0.10 0.16 0.22 0.28 0.34 0.40 MCDP3036CNPA 0.07 0.13 0.21 0.29 0.38 0.46 MCDP0048BNPA 0.17 0.23 MCDP0048CNPA 0.20 2200 0.29 0.36 0.45 0.27 0.35 0.42 0.
PAGE 4
EVAPORATOR COILS MCHP*NPA | MCVP*NPA | MCDP*NPA MCDP* DIMENSIONS - DOWNFLOW G A C Inlet E Opening SUCTION (Vapor) LINE (MCDP 18, 30/36, 48) LIQUID LINE (MCDP 24, 60) 1/2 AIR FLOW K LIQUID LINE (MCDP 18, 30/36, 48) SUCTION (Vapor) LINE (MCDP 24, 60) Inlet Opening B J CONDENSATE DRAIN H 1-3/32 2 D Outlet Opening Outlet Opening F 1 FRONT VIEW 1 SIDE VIEW NOTE - Liquid and Suction Line locations are reversed on MCDP0024ANPA and MCDP0060DNPA models.
PAGE 5
EVAPORATOR COILS MCHP*NPA | MCVP*NPA | MCDP*NPA MCHP* SPECIFICATIONS General Data Model No. Nominal size - Tons Line connections in. MCHP 24A MCHP 24B MCHP 30A MCHP 30B MCHP 36B MCHP 48B MCHP 48C 2 2.5 2.5 3 3.5/4 3.5/4 4 5 Suction o.d. - sweat 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 Liquid o.d. - sweat 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 (2) 3/4 (2) 3/4 (2) 3/4 (2) 3/4 (2) 3/4 (2) 3/4 (2) 3/4 (2) 3/4 (2) 3/4 45 49 55 53 48 60 59 69 78 Shipping Data - lbs.
PAGE 6
EVAPORATOR COILS MCHP*NPA | MCVP*NPA | MCDP*NPA MCHP* 1 PREFERRED AIR FLOW Optional right-hand airflow requires a field fabricated 6 in. (152 mm) spacer in-between the furnace and coil. AIR FLOW 1 OPTIONAL AIR FLOW TOP VIEW 21-1/2 (546) 3/4 (19) 3/4 (19) 3/4 (19) 20 (508) OPENING 3/4 (19) B C SUCTION LINE F CONDENSATE DRAINS A in. B mm in. 1-3/4 (44) in. in.