mrcool 13seer r410 cond install manual 4web

Unitary Ducted Split AC & HP
5
2.2 Installation Clearance Data
>1000mm
>1000m
（40inch）
（40inch）
（32inch）
（120inch）
（40inch）
（40inch）
m
>800mm
>3000mm
>1000mm
>1000mm
Floor
Floor
Fig.4
2.3 Units Installation
2.3.1 Installation Positions of Condensing Units
● Outdoor Unit must be xed on stable and solid surface of oor.
● Don’t install Outdoor Unit under window or between buildings, and prevent the operation
noise from room.
● There should be no obstructions at both air inlet and outlet of indoor and outdoor units for
maintaining well air ventilation.
● When installing indoor unit, make sure that the hanging parts at top are strong enough to
stand the weight of unit.
2.3.2 Matters Need Attention
● Before installation, make sure that the power supply comply with nameplate and check the
security of the power supply.
● Do not use or place combustible and explosive gas or liquid near the air conditioner.
● Do not attempt to install Air Conditioner by yourself to guarantee the air Conditioner can be
permanent use.
● In the event of malfunction(burning smell, etc.),stop operation immediately and turn off the
power switch.
● Do not insert ngers or objects into the outlet port or inlet grillers.
● Do not check or repair the air Conditioner when it is running.
● Do not sprinkle water on the air Conditioner or operate it with wet hands.
● Do not climb or place objects on the air conditioner.
For more details visit www.MrCool.com