Installation Guide
Page 27 mrcool.com
Troubleshooting
Error Code
WARNING
1) When abnormalities occur, stop the unit immediately and disconnect power. Contact
MRCOOL. If the unit continues to run abnormally, it may damage the unit and cause an
electric shock or a fire hazard.
2) DO NOT attempt repairs to the appliance yourself. Improper repair and maintenance
can create electric shock and fire hazards. Please contact MRCOOL Tech Support for
further guidance or a qualified professional for repairs.
Number Error Code Error
1 E1 Compressor high pressure protection
2 E4 Compressor air discharge high-temperature protection
4 F2 Condenser temperature sensor error
5 F3 Outdoor ambient temperature sensor error
6 F4 Discharge temperature sensor error
7 F6 Outdoor unit tube temperature sensor error
8
9
EE Outdoor unit memory chip error
10
PF Electric box sensor error
11
H3 Compressor overload protection
12
H4 Overload
13
H5 IPM protection
14
H6 DC fan error
15
H7 Driver out-of-step protection
16
HC Pfc protection
17
Lc Startup failure
18
Ld Compressor phase-sequence protection
19
LF Power protection
20
U7 4-way valve switch-over error
P0 Drive reset protection
3 E3
Compressor low pressure protection, refrigerant lack protection and refrigerant
collecting mode
If the display panel or wired control displays an error code, please refer to the following table: