Use and Care Manual

Page 28mrcool.com
Unit Installation
Electrical Connection
Connecting the Power Cord & Communication Wire
Screw with
Special Fastener
Round
Terminal
Wire
Terminal
Board
For all terminal wiring (Refer to Fig. 2.28):
Lead the connection wire and power cord through the insulation tube. Then fix
the wires with wire clamps (as shown in Fig. 2.28).
Fig. 2.28
Fig. 2.27
Cord Clamp
Insulation Tube
WARNING
1. Before work begins, please check to ensure the unit is powered OFF.
2. Improper wire connection may cause electrical components to burn.
3. Connect the wires firmly to the wiring box. Incomplete installation may create a fire hazard.
4. Use wire clamps to secure the external covers of connecting wires. Insulators must be clamped
securely; otherwise, electrical leakage may occur.
5. Ground wire must be connected.