Instructions / Assembly

Page 2 of 12 507296-02Cmrcool.com
or maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
agency.
WARNING
Installation
These instructions explain the recommended method of
installation of the packaged heat pump and air conditioner
system.
read prior to beginning installation. Note particularly any
CAUTIONS or WARNINGS in these instructions and all
labels on the units.
equipment should be determined prior to installation.
Inspection of Shipment
the unit inside the carton if the carton is damaged. File a
as claim may be denied.
are as ordered.
Limitations
and local safety codes.
also be observed.
outdoor air stream. The outdoor fan is not designed to
operate against any additional static pressure.
Location
clearance for free entrance to the air inlet and discharge
service access.
not settle or shift. Adequate structural support must be
provided. Install the unit in level position. Isolate the base
from the building structure to avoid possible transmission
of sound or vibration into the conditioned space.
The heat pump unit foundation should be raised to a
In areas that have
prevent ice accumulation. The unit should not be located
defrost condensate.
Avoid placing the unit near quiet areas, such as
sleeping quarters or study rooms. Normal operating
sound levels may be objectionable if the unit is placed near
certain rooms.
For improved start-up performance, the indoor coil
should be washed with suitable detergent to remove
any residue from manufacturing processes.
Roof Curb Installation
Instructions and be sure that all required clearances are
observed.
Rigging and Handling
CAUTION
packaging until the unit is near the place of installation.
An optional lifting lug kit may be purchased separately for
used across the top of the unit.
The lengths of the forks
of the forklift must be a minimum of 42”.