Spec Sheets
MPC*1M414A-2
PRODUCT SPECIFICATIONS
14 SEER ELECTRIC/ELECTRIC
PACKAGED UNIT
FORM NO. MPC*1M414A-2 (01/2021)
Page 1
REFRIGERANT SYSTEM
• Environmentally friendly R410A refrigerant
• Copper tubing with enhanced fin coils
• Internal service gauge ports
• Sleeved distributor tubes
• Antimicrobial insulated drain pan
• High and Low Threaded pressure switches for system protection
CABINET CONSTRUCTION
• Heavy-gauge galvanized steel base rails with rigging holes
• Rounded corners for safety and an attractive, clean appearance
• One piece base design for strength and stability
• Condensate and coil runoff drains to the perimeter of the unit
• Horizontal and downflow duct openings are flanged to minimize
water entry
• Low profile, with compact footprint
• Insulation to minimize heat loss plus reduce sound
• Textured pre-painted steel cabinet finish
• Superior service access to components
• Louvered coil guard protection
• One piece “no leak” top design
BLOWER
• Insulated compartment to reduce sound
• Efficient constant torque motor for wide airflow range
• Slide out blower housing for easy service
INSTALLATION
• Horizontal or down discharge capable
• Horizontal and downflow duct covers provided with unit for
installation flexibility
• Drain pan float switch monitors condensate level in drain pan and
shuts down unit if drain becomes clogged
• Utility connections on “right side”
• Kits enable bottom gas and power entry through base pan
ACCESSORIES
• Electric heat kit
WARRANTY
10 year limited parts and compressor warranty. See limited
warranty document for details.
mrcool.com