Integration Instructions

PCBFootprintandDimensions:




ListofapplicableFCCrules:
 CFR47FCCPart15,SubpartC,15.203
 CFR47FCCPart15,SubpartC,15.205
 CFR47FCCPart15,SubpartC,15.207
 CFR47FCCPart15,SubpartC,15.209
 CFR47FCCPart15,SubpartC,15.247
 CFR47FCCPart2,
2.1051
 CFR47FCCPart2,2.1053
 CFR47FCCPart2,2.1091

Operationaluseconditions:
Regulated power for the SPNYPAMOD-52832 is required. The input voltage Vcc
range should be 1.7V to 3.6V. Suitable decoupling must be provided by external
decoupling circuitry (1uF and 0.1uF). It can reduce the noise from power
supply and increase power stability.


Thefollowingarerequiredforsoftwaredevelopment
 DebugJ‐Tag:SeggerJ‐Link,IDAP‐Link,oranyARMcompatibleJ‐Tag.
 NordicSDKandBLEstack(https://developer.nordicsemi.com/
)
 C/C++embeddedsoftwaredevelopmentenvironment:SeggerEmbeddedStudio,
Eclipse,Keil…
FlashingFirmware: