Specifications

Known issues with
firmware v4.7 fdr 35
27
6.2.13. NM with VLAN ID 0 (disabled) will not forward
VLAN packets
(BZ#: 7461)
Description: An NM that has VLAN tagging disabled does NOT forward VLAN tagged packets
between its RJ45 and SFP ports.
Suggested Work-Around: None.
Customer Impact: Minimal. Informational only.
Corrective Action: This feature works per design.
6.2.14. LNXNM-OT: SSH session from serial CLI timeout
is too long.
(BZ#: 8601)
Description: Hung SSH sessions within the console appear frozen.
Suggested Work-Around: Execute multiple "sys disconnect pid XXX " to stop open sessions.
Customer Impact: Moderate to severe.
Corrective Action: This issue will be addressed in future software upgrades.
6.2.15. LNXNM-OT:
nbsCmmcTrapPortMaximumExceeded trap not seen
OSSH.
(BZ#: 8623)
Description: The MaximumExceeded trap isn't supported for any of the Fiberdriver linecards.
Suggested Work-Around: None.
Customer Impact: Minimal.
Corrective Action: This issue will be addressed in future software upgrades.
6.2.16. LNXNM-OT: nbsCmmcTrapSwitchover trap not
sent out.
(BZ#: 8624)
Description: The Switchover trap isn't supported for any of the Fiberdriver linecards.
Suggested Work-Around: None.
Customer Impact: Minimal.
Corrective Action: This issue will be addressed in future software upgrades.