User manual

MRV Communications, Inc. – Installation Manual
25
Installation
This chapter shows how to mount the TereScope and and
accessories at the site (see Appendix D for the required material).
See Unpacking Instructions in Appendix C.
CAUTION: TereScope must be mounted in the horizontal position only;
max angle 45
o
Accessories
The standard mounting accessories are supplied with the transceivers (TereScope
heads) in the kit. They are designed for typical mounting on horizontal and vertical
surfaces.
Description
The accessories kit (supplied by MRV) consists of:
o The Mounting Plate (JMP)
o The Aiming Head
o The Installer Tool Kit (JITK-L)
The JMP is used for mounting the transceiver on the support surface, i.e., a
horizontal concrete surface/plate only.
Chapter
5
%
JMP
Mounting Plate
(dimensions in mm)
Dimensions in mm
Screw for
g
roundin
g
Figure 5.1a: JMP
Figure 5.1b: JMP scheme