User's Manual

- 2 -
NOTE: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference.
Note: The manufacturer is not responsible
for any radio or TV interference caused by
unauthorized modifications to this
equipment. Such modifications could void
the user’s authority to operate the
equipment.
Section 3
Technical Data
Model ..............................TC-26B
Operating Frequency.......10.525 GHz +/- 25 MHz
Detection Method ............Microprocessor-Analyzed
Doppler Microwave
Detection Pattern Adjustable- (see Fig. 2)
Detection Angle ...............Adjustable, Tilt & Swivel
Detection Mode ...............Continuous with Motion
Response Time ...............0.150 seconds
Time Delay......................Adjustable, 0-5 seconds
Power Requirements .......12V to 24V AC or DC
Wiring Requirements.......Four-Conductor Cable
(see Wiring Section, Pg.1)
Current Consumption.......75 mA (0.075 Amps)
Power Consumption.........1.8 watts max. @ 24V
Relay Contacts ................Form C, rated at 3 amps
Mounting .........................Heavy-duty bracket,
predrilled & slotted for pole mount
Temperature....................-35°F to 165°F
(-37°C to 75°C)
Weight.............................3 lbs. (1.4 kg)
Size.................................7" x 4" x 4"
(17.8cm x 10.2cm x 10.2cm)
Color ...............................Gray, Powder Coated
Enclosure ........................Aluminum with stainless
steel hardware
Section 4
Warranty
MS Sedco guarantees this product to be free from
manufacturing defects for one year from date of installation.
Unless MS Sedco is notified of the date of installation, the
warranty will be in effect for one year from the date of
shipment from our factory. If, during the first year, this motion
detector or support device fails to operate and has not been
tampered with or abused, the unit can be returned prepaid to
the factory and it will be repaired free of charge. After one
year, the unit will be repaired for a nominal service charge.
This limited warranty is in lieu of all other warranties,
expressed or implied, including any implied
warrantability of merchantability, and no representative
or person is authorized to assume for MS Sedco any
other liability in connection with the sale of our products.
All warranties are limited to the duration of this written
limited warranty. In no event shall MS Sedco be liable for
any special, incidental, consequential or other damages
arising from any claimed breach of warranty as to its
products or service.
8/28/01
!