User's Instructions

(2) Slide the webbing loop (09) between the gap in
the Split D-ring (01) until half of the webbing is
within the Split D-ring and half of the webbing is
underneath it.
(3) With your right hand, grip the Retractor (02) and
pull forcefully to the User’s right. With your left,
fold the webbing loop (09) under the Split D-ring
(01) until it is able to slide between the gap and
within the Split D-ring. Note that the stitching on
these loops is robust and can handle the
amount of force required.
(4) Flatten out the webbing loop (09) once it is fully
contained within the Split-D ring.
(5) Attach the Retractor (02) to the bottom of
LUNAR:
a) Push and hold in theRetractor Swivel Button
(04).
b) Insert the Swivel End (05) into the bottom of
LUNAR.
MSA LUNAR 15
EN 4 Basic Operation