Users Manual

Tethering LUNARto an M1 SCBA
(1) Identify the M1 SCBAshoulder strap webbing
loop (09). It sits on the User’s right-hand side,
one loop above the strap adjustment.
(2) Slide the webbing loop (09) between the gap in
the Split D-ring (01) until half of the webbing is
within the Split D-ring and half of the webbing is
underneath it.
(3) With your right hand, grip the Retractor (02) and
pull forcefully to the User’s right. With your left,
fold the webbing loop (09) under the Split D-ring
(01) until it is able to slide between the gap and
within the Split D-ring. Note that the stitching on
these loops is robust and can handle the amount
of force required.
(4) Flatten out the webbing loop (09) once it is fully
contained within the Split-D ring.
MSA LUNAR 17
EN 4 Basic Operation