Specification Sheet

MSAsafety.com
15
1
Topgard Caps and Hats have been tested to radiant heat loads producing temperatures up to, but not exceeding, 275°F.
2
Thermalgard Caps and Hats have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350°F.
Classication ................................. Type I
Application ..................................... General purpose;
elevated temperature
2
Shell Material ................................ Glass-reinforced nylon
Styles .................................................. Slotted cap
Colors .................................................
n

nnnnnn
Sizes .................................................... Standard (6
1
⁄2 – 8”)
Standards ........................................ ANSI/ISEA Z89.1-2014 (Class G)
CSA Z94.1-2015 (Class G)
Certication ................................... Third-party by SEI
Thermalgard Cap
with Fas-Trac III Suspension
DESCRIPTION
w/ 1 Touch
Suspension
w/ Fas-Trac III
Suspension
YELLOW 486964 486959
WHITE 486965 486960
RED — 486961
ORANGE 486967 486962
BLUE 486968 486963
BRIGHT ORANGE 800359 800360
GREEN 487399 814343
STEEL GRAY — 10095325
Thermalgard® Hard Hats
NFPA 70E is a work practice; it is not a standard
and does not specify any test methods. No products
“meet” NFPA 70E—users simply follow the practice
of NFPA 70E. For head protection, NFPA 70E
recommends that users wear Class E hard hats in
following this work practice.
?
?
?
?
?
?
KNOW?
DID YOU
Customization: Imprinting and striping available—see pages 8–9 Replacement Suspensions: See page 7
DESCRIPTION
w/4-Point Fas-Trac III
Suspension
w/6-Point Fas-Trac III
Suspension
WHITE 10074067 10084078
BLUE 10074068 10084079
YELLOW 10074069 10084080
ORANGE 10074070 10084081
RED 10074071 10084082
GREEN 10074072 10084083
GRAY 10074073 10084084
HIVIZ ORANGE
1
10074077 10084088
HIVIZ YELLOWGREEN
1
10074084 10084095
HIVIZ ORANGE
W/YELLOWGREEN STRIPE
1
10095987 10095988
HIVIZ YELLOWGREEN W/
ORANGE STRIPE
1
10095989 10095990
HIVIZ ORANGE
W/SILVER STRIPE
1
10096141 —
HIVIZ YELLOWGREEN
W/SILVER STRIPE
1
10096142 —
SmoothDome® Hard Hats
Classication ................................. Type I
Application ..................................... General purpose; welding
Shell Material ................................ Polyethylene
Styles .................................................. Vented or non-vented slotted cap
Colors .................................................

nnnnnnnn
Sizes .................................................... Standard (6
1
⁄2 – 8”)
Standards ........................................ ANSI/ISEA Z89.1-2014 (Class E)
CSA Z94.1-2015 (Class E)
Certication ................................... Third-party by SEI
SmoothDome Cap
with Fas-Trac III Suspension
MSA helmets marked LT meet voluntary
requirements for “Lower Temperature.”
Helmets marked LT are conditioned to -22°F
and then tested for impact and penetration,
as outlined in the Standard. Any helmet NOT
marked with LT is tested to 0°F.
?
?
?
?
?
?
KNOW?
DID YOU