Specification Sheet

26
Above-the-Neck Protection Solutions
PART NO. 10115844 10115845
MATERIAL Polycarbonate with EN 166 performance-rated
anti-fog/anti-scratch coatings for hot/humid conditions
(N,K marks, respectively)
Polycarbonate with EN 166 performance-rated
anti-fog/anti-scratch coatings for hot/humid conditions
(N,K marks, respectively) – green tint to reduce glare and eye strain
FEATURES • Maximum UV protection
• Impact-rated (Z87+)
• Slightly thicker for industrial impact applications
PRODUCT
SPECIFICS
• 9.25” (23.5 cm) x 17” (43.2 cm) x .098” (2.5mm)
• Molded visor for superior optics under heavy duty use
• Extra-thick visor helps prevent warping, cracking or crazing
• Conditioned to a high of 131˚F (and a low of -23˚F) and then
tested to the medium impact rating in the EN166 standard
(higher impact speed than ANSI/ISEA Z87.1-2010)
• Visors do not reect IR; not recommended for use against
radiant heat hazards
• 9.25” (23.5 cm) x17” (43.2 cm) x .098” (2.5mm)
• Molded visor for superior optics under heavy duty use
• Extra-thick visor helps prevent warping, cracking or crazing
• Conditioned to a high of 131˚F (and a low of -23˚F) and then
tested to the medium impact rating in the EN166 standard
(higher impact speed than ANSI/ISEA Z87.1-2010)
• Visors do not reect IR; not recommended for use against
radiant heat hazards
• Not for use where a Shade IR visor is required
Markets: Food manufacturing/canneries, steel mills, construction,
open pit mining, agriculture, oil/gas/petrochemical reneries, rubber
manufacturing, steam tunnels
Applications: Food processing, machine operation, maintenance,
millwright, cutting, punching, extrusion, drilling, blasting, casting/
conveying, chemical mixing, sanding
Standards
1
: ANSI/ISEA Z87.1-2015; EN 166 (2C-1.2 MSA IBT89KN);
CSA Z94.3 and AS/NZS 1337
Certication: Third-party by Intertek, INSPEC International Ltd.,
CSA International and SAI Global Ltd.
Min Order Qty: 5
V-Gard Visors: Elevated Temperature
V-Gard Visors: Radiant Heat/Elevated Temperature
Reective-coated visors oer protection from irradiance, or the electromagnetic radiation (EMR) energy created in elevated temperature
environments. V-Gard Reective Coated Visors oer an EN166 “R” mark. This means they have been certied to reect >60% Infrared (IR)
radiation in the 780 nm to 2000 nm wavelengths. V-Gard Reective Visors have been shown to reduce temperatures behind the visor by several
hundred degrees, and lower irradiance to below 0.1 kW/m
2
. For details on V-Gard Reective-Coated Visor performance, please see the MSA
White Paper, “Radiant Heat Resistance” (ID 0670-020 MC) and “MSA V-Gard® Reective-Coated Visors: Radiant Heat Resistance Simplied”
(ID 0670-023 MC), available on MSAsafety.com.
?
?
?
?
?
?
KNOW?
DID YOU
PART NO. 10177690 10177701
MATERIAL Polycarbonate with EN 166 performance-rated
reective coating (R mark) — clear; molded
Polycarbonate with EN 166 performance-rated reective coating
(R mark) – green tint to reduce glare and eye strain; molded
FEATURES • Maximum UV protection
• Impact-rated (Z87+)
• Reects >60% Infrared (IR) radiation (EN166 R mark) in the 780nm to 2000nm wavelength
PRODUCT
SPECIFICS
• 9.5” (24.1 cm) x 17.75” (45.09 cm) x .07” (1.8 mm)
• Reective coating reects IR and helps dissipate heat
• Thick visor helps prevent warping, cracking or crazing
• Extended length for greater coverage of face and neck;
DO NOT use for welding
• 9.5” (24.1 cm) x 17.75” (45.09 cm) x .07” (1.8 mm)
• Reective coating reects IR and helps dissipate heat
• Not for use where a Shade IR visor is required
• Thick visor helps prevent warping, cracking or crazing
• Extended length for greater coverage of face and neck;
DO NOT use for welding
Markets: Metal industries, glass manufacturing, iron and steel
foundries, chemical manufacturing, construction, general
manufacturing, textile manufacturing, mining, oil and gas
Applications: Grinding, pouring, casting, blowing/melting, rolling,
sawing, cutting, crimping, millwrighting, machining/operating,
pipelining, pulping
Standards
1
: ANSI/ISEA Z87.1-2015; EN 166 (2C-2.5 MSA 1BT3R
[clear] and 2-4 MSA 1BT3R [green tint]); CSA Z94.3 and AS/NZS 1337
Certication: Third-party by Intertek, INSPEC International
Ltd., CSA International and SAI Global Ltd.
Min Order Qty: 5
1
Standards requirements met by each V-Gard Frame or Headgear/V-Gard Visor combination designated on each V-Gard Visor.