Instruction manual

2. The instrument responds:
• backlight flashes
• screen flashes
• alarm sounds
• alarm lights flash
• instrument electronic serial
number and software
version display
(FIGURE 2-2) appears.
After this screen, the instrument
self-tests all major electronic
components and the (FIGURE 2-3)
display appears.
After tests are completed, if ERROR
appears on the screen and the alarm
sounds, refer to the Technical Manual
for the FiveStar Alarm (P/N 710440).
When the electronics test passes, the
unit inquires if the user wants to enter
Setup Mode by displaying the
(FIGURE 2-4) screen.
If PAGE (NO) is pressed, or no
buttons are pressed for five seconds,
the unit assumes the user did not
want to reset any options and unit
turns ON.
If RESET (YES) is pressed, the
instrument enters the Setup Mode.
If the Alternate Language Option is
enabled, the (FIGURE 2-5)
display appears.
If PAGE (SKIP) is pressed
(or if no buttons are pressed for five
seconds), the currently selected
language remains the same.
If RESET (SET) is pressed the
(FIGURE 2-6) display appears.
Figure 2-2.
Serial Number
and Software Version
Figure 2-3.
Self Test
Figure 2-4.
Setup Now - No/Yes?
Figure 2-5.
Alternate Language Option
Chapter 2, Using the FiveStar Alarm Instruction Manual
2-2 FiveStar Alarm