Instruction manual

cylinders to introduce other calibration gases.)
If the readings are not within these limits, the FiveStar Alarm
requires recalibration. See "Autocalibration" later in this Chapter
or, if autocalibration is not enabled, see the FiveStar Technical
Manual (P/N 710440), Chapter 2, for detailed manual calibration
instructions.
Options
Optional Displays
NOTE: The following display pages appear only if enabled; see
the FiveStar Alarm Technical Manual for instructions.
Press the PAGE button to move to:
Peak Readings
This shows the highest levels of
gas that the FiveStar Alarm
recorded since it was turned ON or
since the peak readings were reset
(FIGURE 2-30).
To reset the Peak Readings:
1. In Peak display, press the
RESET button.
• The (FIGURE 2-31)
display appears.
2. Press the RESET (YES)
button to reset peak readings
or press the PAGE (NO)
button or wait 15 seconds to
cancel.
Press the PAGE button to move to
the (FIGURE 2-32) display.
Figure 2-30.
Peak Readings
Figure 2-31.
Reset Peak Readings
Chapter 2, Using the FiveStar Alarm Instruction Manual
2-16 FiveStar Alarm