Instruction manual

Table 4-9. NITRIC OXIDE
(appropriate models only) - Typical Performance
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Table 4-10. NITRIC OXIDE-
Cross Reference Factors
for FiveStar Calibration
Using Calibration Cylinder (P/N 812144)
Set to 50 ppm NO . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Nitrogen Dioxide Sensor Specifications. . . . . . . . . . . . . . 4-8
Table 4-11. NITROGEN DIOXIDE
(appropriate models only) -
Typical Performance Specifications . . . . . . . . . . . . . . 4-8
Table 4-12. NITROGEN DIOXIDE -
Cross Reference Factors
for FiveStar Calibration
Using Calibration Cylinder (P/N 808977)
Set to 10 ppm NO
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Sulfur Dioxide Sensor Specifications. . . . . . . . . . . . . . . . 4-9
Table 4-13. SULFUR DIOXIDE
(appropriate models only) -
Typical Performance Specifications . . . . . . . . . . . . . . 4-9
Table 4-14. SULFUR DIOXIDE -
Cross Reference Factors
for FiveStar Calibration
Using Calibration Cylinder (P/N 808978)
Set to 10 ppm SO
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Ammonia Sensor Specifications. . . . . . . . . . . . . . . . . . . 4-10
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Zero Stability (FIGURE 4-1). . . . . . . . . . . . . . . . . . . . . . 4-10
Table 4-15. AMMONIA (appropriate models only)
Typical Performance Specifications . . . . . . . . . . . . . 4-10
Table 4-16. AMMONIA Cross Reference Factors . 4-11
Figure 4-1. Ammonia Sensor Zero Stability . . . . . . 4-11
Phosphine Sensor Specifications. . . . . . . . . . . . . . . . . . 4-12
Table 4-18. PHOSPHINE -
Cross Reference Factors
for FiveStar General-Purpose Calibration
Using Calibration Cylinder (P/N 478191),
(P/N 478192), (P/N 804769), or (P/N 804770)
Set to 58% LEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Table of Contents Instruction Manual
TOC-6 FiveStar Alarm