96M5985o Intel® Sandy Bridge / PCH Mini-ITX Motherboard USER’S MANUAL Version 1.
Acknowledgments AMI is a registered trademark of American Megatrends Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Intel® Sandy Bridge DC Mobile Processor are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Fintek is a registered trademark of Fintek Electronics Corporation. All other product names or trademarks are properties of their respective owners.
Table of Contents Introduction ....................................................... 1 Product Description ............................................................. 1 Checklist .............................................................................. 2 96M5985o Specifications ................................................... 3 Board Dimensions ............................................................... 5 Installations .......................................................
This page is intentionally left blank.
INTRODUCTION Introduction Product Description The 96M5985o Mini ITX motherboard is based on the latest Intel® QM67 chipset. The platform supports 2nd generation Intel® Core processor family with rPGA988B packing and features an integrated dualchannel DDR3 memory controller as well as a graphics core. The latest Intel® processors provide advanced performance in both computing and graphics quality. This meets the requirement of customers in the gaming, POS, digital signage and server market segment.
INTRODUCTION Checklist Your 96M5985o package should include the items listed below.
INTRODUCTION 96M5985o Specifications Product Name Form Factor CPU Type CPU Speed Cache CPU Socket Chipset BIOS Memory VGA LAN USB Serial ATA Audio LPC I/O Digital IO IAMT(7.0) Expansion Slots Edge Connector: Onboard Header/ Connector Watchdog Timer System Voltage Others 96M5985o Mini-ITX - Intel® 2nd generation CoreTM i7/i5/i3 QC/DC mobile processor - rPGA package, 37.5 x 37.5 mm - TDP: QC = 45W~ 55W/ DC = 35W **Sandy Bridge CPU is NOT socket compatible with Arrandale Up to 2.
INTRODUCTION Board Size 4 170mm x 170mm 96M5985o User’s Manual
INTRODUCTION [ Board Dimensions 96M5985o User’s Manual 5
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the 96M5985o in order to set up a workable system. The topics covered are: Installing the CPU.................................................................................. 7 Installing the Memory ............................................................................ 8 Setting the Jumpers ................................................................................
INSTALLATIONS Installing the CPU The 96M5985o board supports rPGA988B socket for Intel® Sandy Bridge Dual Core mobile processors. The processor socket comes with a screw to secure the processor. As shown in the left picture below, loosen the screw first before inserting the processor. Place the processor into the socket by making sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket. Once the processor has slide into the socket, fasten the screw.
INSTALLATIONS Installing the Memory The 96M5985o board supports two DDR3 memory socket for a maximum total memory of 8GB in DDR3 SO-DIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on the memory slot. 2.
INSTALLATIONS Setting the Jumpers Jumpers are used on 96M5985o to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on 96M5985o and their respective functions. Jumper Locations on 96M5985o ......................................................... 10 JP2, JP3, JP4: RS232/RS422/RS485 (COM1) Selection ....................
INSTALLATIONS Jumper Locations on 96M5985o Jumpers on 96M5985o ........................................................................... Page JP2, JP3, JP4: RS232/RS422/RS485 (COM1) Selection..................... 11 JP5: COM1 RS232 RI/+5V/+12V Power Setting................................ 11 JP6: COM2 RS232 RI/+5V/+12V Power Setting................................ 11 J10: LCD Panel Power Selection .........................................................
INSTALLATIONS JP2, JP3, JP4: RS232/RS422/RS485 (COM1) Selection COM1 Function Jumper Setting (pin closed) RS-232 RS-422 RS-485 JP2: 3-5&4-6 JP2: 1-3&2-4 JP2: 1-3&2-4 JP3: 1-2 JP3: 3-4 JP3: 5-6 JP4: 3-5 & 4-6 JP4: 1-3 & 2-4 JP4: 1-3 & 2-4 JP5: COM1 RS232 RI/+5V/+12V Power Setting JP5 Setting Pin 1-2 Short/Closed Pin 3-4 Short/Closed Pin 5-6 Short/Closed Function +12V RI +5V JP6: COM2 RS232 RI/+5V/+12V Power Setting JP6 Setting Pin 1-2 Short/Closed Pin 3-4 Short/Closed Pin 5-6 Short/Closed
INSTALLATIONS J10: LCD Panel Power Selection J10 LCD Panel Power 3.
INSTALLATIONS Connectors on 96M5985o Connector Locations on 96M5985o .................................................... 14 CN1: COM1 and COM2 Serial Ports .................................................. 15 CN2: DVI-D and DVI-I Connector ..................................................... 15 CN3: USB3.0 Connector .................................................................... 16 CN4: HDMI Connector .......................................................................
INSTALLATIONS Connector Locations on 96M5985o 14 96M5985o User’s Manual
INSTALLATIONS CN1: COM1 and COM2 Serial Ports Pin # Signal Name RS-232 R2-422 RS-485 [ 1 2 3 4 5 6 7 8 9 10 DCD RX TX DTR Ground DSR RTS CTS RI NC TXTX+ RX+ RXGround NC NC NC NC NC CN2: DVI-D and DVI-I Connector Signal Name Pin # DATA 2DATA 2+ Shield 2/4 DATA 4DATA 4+ DDC CLOCK DDC DATA N.
INSTALLATIONS [ Signal Name Pin # Pin # Signal Name DATA 2DATA 2+ Shield 2/4 DATA 4DATA 4+ DDC CLOCK DDC DATA N.C DATA 1DATA 1+ SHIELD 1/3 DATA 3DATA 3+ DDC POWER A GROUND 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C1 C2 C3 C4 C5 C6 HOT POWER DATA 0DATA 0+ SHIELD 0/5 DATA 5DATA 5+ SHIELD CLK CLOCK CLOCK + N.C. N.C. N.C. N.C. N.C. N.C. CN3: USB3.
INSTALLATIONS J1: Digital I/O Signal Name GND OUT3 OUT2 IN3 IN2 Pin 1 3 5 7 9 Pin 2 4 6 8 10 Signal Name VCC OUT1 OUT0 IN1 IN0 J3: ATX Power Supply Connector Signal Name 3.3V -12V Ground PS-ON Ground Ground Ground -5V +5V +5V Pin # 11 12 13 14 15 16 17 18 19 20 Pin # 1 2 3 4 5 6 7 8 9 10 Signal Name 3.3V 3.
INSTALLATIONS JP8, JP7: LVDS Connectors (1st channel, 2nd channel) The LVDS connectors on board consist of the first channel (LVDS1) and second channel (LVDS2). Signal Name TX0Ground TX15V/3.3V TX3TX2Ground TXC5V/3.
INSTALLATIONS J24: Audio Pin Header for Chassis Front Panel Signal Name Pin Pin Signal Name MIC IN_L 1 2 Ground MIC IN_R 3 4 DET LINE_R 5 6 Ground Sense 7 8 KEY LINE_L 9 10 Ground J26: Front Panel Connector Signal Name Pin # Pin # Signal Name Power BTN HDD LED+ Reset BTN Power LED+ 1 3 5 7 2 4 6 8 Power BTN HDD LEDReset BTN Power LED- CN6, CN7, CN9, CN10, CN12, CN13: SATA Connectors Pin # Signal Name 1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground CPU_FAN1: CPU Fan Power Connector Pin # Signal Name
INSTALLATIONS JP1: LPC Debug Connector (Factory use only) J11: Mini-PCIE Connector JP12: SPI Flash Connector (Factory use only) 20 96M5985o User’s Manual
INSTALLATIONS This page is intentionally left blank.
BIOS SETUP BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction............................................................................. 23 BIOS Setup ........................................................................................ 23 Main BIOS Setup .............................................................................. 24 Advanced Settings .....................
BIOS SETUP BIOS Introduction The BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel processors. The BIOS provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. BIOS Setup The BIOS provides a Setup utility program for specifying the system configurations and settings.
BIOS SETUP Main BIOS Setup This setup allows you to record some basic hardware configurations in your computer system and set the system clock. Aptio Setup Utility – Copright © 2010 American Megatrends, Inc.
BIOS SETUP Advanced Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference.
BIOS SETUP PCI Subsystem Settings This section allows you to configure the PCI, PCI-X and PCI Express settings. Aptio Setup Utility Main Advanced Chipset Boot Security PCI Bus Driver Version PCI ROM Priority V 2.03.
BIOS SETUP Extended Tag If ENABLED allows Device to use 8-bit Tag field as a requester. No Snoop Enables or Disables PCI Express Device No Snoop option. Maximum Payload Set Maximum Payload of PCI Express Device or allow System BIOS to select the value. Maximum Read Request Set Maximum Read Request Size of PCI Express Device or allow System BIOS to select the value. ASPM Support Set the ASPM Level: Force L0- Force all links to L0 Stage: AUTO – BIOS auto configure: DISABLE- Disables ASPM.
BIOS SETUP ACPI Settings System ACPI Parameters. Aptio Setup Utility Main Advanced Chipset Enable ACPI Auto Configuration Enable Hibernation ACPI Sleep State Lock Legacy Resources Boot Security Disabled Enabled S3 (Suspend to R…) Disabled Save & Exit → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save & Exit ESC: Exit Enable ACPI Auto Configuration Enables or Disables BIOS ACPI Auto Configuration.
BIOS SETUP Wake up event settings Enable/Disable Wake up event. Aptio Setup Utility Main Advanced Chipset Boot Wake system with Fixed Time Disabled Wake on Ring Wake on PCIE Wake Event Disabled Disabled Security Save & Exit → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save & Exit ESC: Exit Wake system with Fixed Time Enables or Disables System wake on alarm event.
BIOS SETUP CPU Configuration This section shows the CPU configuration parameters. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit CPU Configuration Intel® Core™ i7-7210QE CPU @ 2.
BIOS SETUP Adjacent Cache Line Prefetch To turn on/off prefetching of adjacent cache lines. Intel Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology Local x2APIC Enable Local x2APIC. Some OSes do not support this. EuP/ErP Power Saving Controller Saving the power consumption on power off. Aptio Setup Utility Main Advanced Chipset Standby Power on S5 Boot Security Save & Exit [Enable Provide the Standby Power for devices.
BIOS SETUP PCH-FW Configuration Configure Management Engine Technology Parameters. Aptio Setup Utility Main Advanced Chipset ME FW Version ME Firmware Mode ME Firmware Type ME Firware SKU Boot Security Save & Exit 0.0.0.0 Configure Management Engine Technolory Parameters.
BIOS SETUP Intel AMT Setup Prompt OEMFLag Bit 0: Enable/Disable Intel AMT Setup Prompt to wait for hot-key to enter setup. BIOS Hotkey Pressed OEMFLag Bit 1: Enable/Disable BIOS hotkey press. MeBx Selection Screen OEMFLag Bit 2: Enable/Disable MEBx selection screen. Verbose Mebx Output OEMFLag Bit 3: Enable/Disable Verbose Mebx Output. Hide Un-Configure ME Confirmation OEMFLag Bit 6: Hide Un-Configure ME without password Confirmation Prompt.
BIOS SETUP USB Configure Enable/Disable USB Configure function. PET Progress User can Enable/Disable PET Events progress to received PET events or not. Intel Amt SPI Protected Enable/Disable Intel AMT SPI write protect. WatchDorg Enable/Disable Intel AMT SPI write protect. ASF Enable/Disable WatchDorg Timer. USB Configuration USB Configuration Parameters. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit USB Configuration USB Devices: 1 Keyboard, 2 Hubs Legacy USB Support USB3.
BIOS SETUP XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. EHCI Hand-off This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. USB transfer time-out The time-out value for Control, Bulk, and Interrupt transfers. Device reset time-out USB mass storage device Start Unit command time-out.
BIOS SETUP Super IO Configuration System Super IO Chip Parameters.
BIOS SETUP H/W Monitor Monitor hardware status. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit PC Health Status CPU System Temperature CPU FAN Speed VCC3V Vcore +5V +12V +1.5V VSB3V VBAT Fan1 Smart Fan Control +45 C +47 C 5976 RPM +3.408 V +1.104 V +5.087 V +12.232 V +1.600 V +3.384 V +3.
BIOS SETUP Serial Port Console Redirection Aptio Setup Utility Main Advanced Chipset Boot COM0 (Disabled) Console Redirection Port is Disabled COM4(PCI Dev0, Func0) (Disabled) Console Redirection Port is Disabled Security Save & Exit → ← Select Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection Enabled Out-of-Band Mgmt Port COM0 (Disabled) Data Bits 8 Parity None Stop Bits 1 Terminal Type VT-UTF8 Screen ↑↓ Select Item Enter: Select +- Change
BIOS SETUP CPU DTS Disabled: ACPI thermal management uses EC reported temperature values. Enabled: ACPI thermal management uses DTS SMM mechanism to obtain CPU temperature values. Out of Spec: ACPI Thermal Management uses EC reported temperature values and TS SMM is used to handle Out of Spec.
BIOS SETUP Chipset Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility Main Advanced ► System ► PCH-IO Chipset Boot Security Save & Exit Security Save & Exit Agent (SA) Configuration Configuration System Agent (SA) Configuration Aptio Setup Utility Main Advanced Chipset Boot System Agent RC Version VT-d Capability 1.1.0.
BIOS SETUP Intel IGFX Configuration Aptio Setup Utility Main Advanced Intel IGFX Configuration IGFX VBIOS Version IGFX Frequency Primary Display Internal Graphics GTT Size Aperture Size DVMT Pre-Allocated DVMT Total Gfx Mem Gfx Low Power Mode ► LCD Control Chipset Boot Security Save & Exit 2102 650 MHz Auto Auto 2MB 256MB 64M 256M Disabled → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save & Exit ESC: Exit Primary Di
BIOS SETUP LCD Control Aptio Setup Utility Main Advanced Chipset LCD Control Primary IGFX Boot Display Active LFP Panel Color Depth LCD Panel Type SDVO-LFP Panel Type Panel Scaling Spread Spectrum clock Chip TV1 Standard TV2 Standard ALS Support Boot VBIOS Default No LVDS 18 Bit 1024x768 LVDS VBIOS Default Auto Off VBIOS Default VBIOS Default Enabled Security Save & Exit → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Sa
BIOS SETUP Spread Spectrum clock Chip Hardware: Spread is controlled by chip; Software: Spread is controlled by BIOS. TV1 Standard Select the ability to configure a TV Format. TV2 Standard Select the ability to configure a TV Minor Format. ALS Support Valid only for ACPI. Legacy = ALS Support though the IGD INT 10 function. ACI = ALS support through an ACPI ALS driver.
BIOS SETUP Memory Configuration Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Memory Information Memory RC Version Memory Frequency Total Memory DIMM#0 DIMM#1 DIMM#2 DIMM#3 CAS Latency (tCL) Minimum delay time CAS to RAS (tRCDmin) Row Precharge (tRPmin) Active to Precharge (tRASmin) 1.1.0.
BIOS SETUP PCI-IO Configuration Aptio Setup Utility Main Advanced Chipset Boot Intel PCH RC Version 1.1.0.
BIOS SETUP PCI Express Configuration Aptio Setup Utility Main Advanced Chipset PCI Express Clock Gating DMI Link ASPM Control DMI Link Extended Synch Control Subtractive Decode Boot Security Save & Exit Enabled L0sL1 Disabled Disabled ► PCI Express Root Port1 Express Root Port2 ► PCI Express Root Port3 ► PCI Express Root Port4 ► PCI Express Root Port5 PCI Port 6 is assigned to LAN ► PCI Express Root Port7 ► PCI Express Root Port8 ► PCI Low MMIO Align Initiate Graphic Adapter Graphics Turbo IMON C
BIOS SETUP Boot Settings This section allows you to configure the boot settings according to your preference. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Boot Configuration Setup Prompt Timeout Bootup NumLock State 1 On Quite Boot Disabled → ← Select CM16 Module Version 07.
BIOS SETUP Security Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Password Description If ONLY the Administrator’s password is set, then this only limits accesss to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup.
BIOS SETUP Save & Exit Settings Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Save Changes and Exit Disacard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Options Save Changes Discard Changes → ← Select Restore Defaults Save as User Defaults Restore User Defaults Boot Override Launch EFI Shell from filesystem device Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save & Exit ESC: Exit
BIOS SETUP Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Boot Override Pressing ENTER causes the system to enter the OS. Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices.
DRIVERS INSTALLATION Drivers Installation This section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made the purchase. The contents of this section include the following: Intel Chipset Software Installation Utility ........................................... 52 VGA Drivers Installation ....................................................................
DRIVER INSTALLATION Intel Chipset Software Installation Utility The Intel Chipset Drivers should be installed first before the software drivers to enable Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM67/Q67 Chipset Drivers. 2. Click Intel(R) Chipset Software Installation Utility. 3.
DRIVERS INSTALLATION VGA Drivers Installation NOTE: Before installing the Intel(R) QM67 Chipset Family Graphics Driver, the Microsoft .NET Framework 3.5 SPI should be first installed. To install the VGA drivers, follow the steps below. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM67/Q67 Chipset Drivers. 2. Click Intel(R) QM67 Chipset Family Graphics Driver. 3. When the Welcome screen appears, click Next to continue. 4.
DRIVER INSTALLATION Realtek HD Audio Driver Installation Follow the steps below to install the Realtek HD Audio Drivers. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM67/Q67 Chipset Drivers. 2. Click Realtek High Definition Audio Driver. 3. On the Welcome to the InstallShield Wizard screen, click Yes to proceed with and complete the installation process.
DRIVERS INSTALLATION LAN Drivers Installation 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM67/Q67 Chipset Drivers. 2. Click Intel(R) PRO LAN Network Driver. 3. When the Welcome screen appears, click Next. On the next screen, click Yes to to agree with the license agreement. 4. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue.
DRIVER INSTALLATION 5. The wizard is ready to begin installation. Click Install to begin the installation. 6. When InstallShield Wizard is complete, click Finish.
DRIVERS INSTALLATION Intel® Management Engine Interface Follow the steps below to install the Intel Management Engine. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) AMT 7.0 Drivers. 2. When the Welcome screen to the InstallShield Wizard for Intel® Management Engine Components, click Next. On the next screen, click Yes to to agree with the license agreement.
DRIVER INSTALLATION 2. When the Setup Progress screen appears, click Next. Then, click Finish when the setup progress has been successfully installed.
DRIVERS INSTALLATION ASMedia USB 3.0 Drivers 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM67/Q67 Chipset Drivers. 2. Click Intel(R) PRO LAN Network Driver. 2. When the Welcome screen to the InstallShield Wizard for Intel® Management Engine Components, click Next. 3. When InstallShield Wizard is complete, click Finish.
APPENDIX Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used.
APPENDIX B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board.
APPENDIX C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumstances, the timer will count to zero and the selected outputs will be driven. Under normal circumstance, the user will restart the WDT at regular intervals before the timer counts to zero.
APPENDIX //--------------------------------------------------------------------------void EnableWDT(int interval) { unsigned char bBuf; bBuf = Get_F81865_Reg(0x2B); bBuf &= (~0x20); Set_F81865_Reg(0x2B, bBuf); //Enable WDTO Set_F81865_LD(0x07); Set_F81865_Reg(0x30, 0x01); //switch to logic device 7 //enable timer bBuf = Get_F81865_Reg(0xF5); bBuf &= (~0x0F); bBuf |= 0x52; Set_F81865_Reg(0xF5, bBuf); //count mode is second Set_F81865_Reg(0xF6, interval); //set timer bBuf = Get_F81865_Reg(0xFA); bBuf
APPENDIX //--------------------------------------------------------------------------// // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. // //--------------------------------------------------------------------------#include "F81865.H" #include
APPENDIX outportb(F81865_INDEX_PORT, REG); Result = inportb(F81865_DATA_PORT); Lock_F81865(); return Result; } //--------------------------------------------------------------------------- //--------------------------------------------------------------------------// // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE.
