Owners manual

INSTALLATION INSTRUCTIONS 3
MSD POWERSPORTS • WWW.MSDPOWERSPORTS.COM • [phone] • FAX [phone]
PROGRAMMING
When MSD View is installed, opened, and connected to the Blaster FI, PN 4248, setting options will
immediately appear. To start, the user will see 10 tunes (0-9) as tabs across the top of the screen. Each
tab represents a Tune that has the same setting and table options. Tune 9 matches the machine’s
stock settings to act as a bypass and is closed to editing. Tunes 0 – 8 are each programmed to meet
the needs or a variety of riding styles. Users can select one of the pre-programmed base tunes right
out of the box, or they can edit those tunes as preferred.
To select a specific tune, turn the White knob of the end of the Blaster FI unit so that the engraved
arrow points to the desired tune number. The White knob is easy to mar, be gentle while adjusting
tunes so that the arrow will be able to be read the next time it is needed.
FLAT HEAD SCREW
OE MODULE
MOUNTING
SCREW
PN 4248
SELF TAPING
SCREWS
THIS BOLT AND SPACER ARE ORIGINAL EQUIPMENT.
THEY ARE TO GO INTO THEIR INITIAL PLACEMENT TO
HOLD THE MSD MOUNTING BRACKET OR OE PLASTICS.
PLEASE PUT THEM IN LAST.
MOUNTING PLATE
Figure 1