User`s manual

Chapter 3 Configuring the System
38
Selecting multiple cameras will also increase system load.
G. TV-out channel
Select the cameras that you want to output to TV via TV-out. If you select more than one
camera, each camera will be displayed using the auto-scan mode on the TV screen.
H. UPS(Uninterruptible Power Supply)
Click “Start UPS” to activate this function. Select a mode to initiate UPS. It enables the system
to shutdown before the end of battery backup power is reached. The UPS device should be
connected to your computer (refer to your UPS user’s guide) before the presetting of this task.
I. Auto scan interval / TV-out auto scan interval
In this section, you can set the time interval for switching between cameras on the computer
monitor and TV screen when in auto-scan mode.
J. Video loss warning
If this item is selected, the system will produce a beeping, warning sound when a video signal
loss is detected.
K. Enable WatchDog