Instruction manual

Chapter 3
3-20
Video Off Option
This setting is used to control the mode in which the monitor will shut down.
Setting options:
Always On Always turn on.
Suspend -> Off During suspend mode, the monitor will shut down.
Susp, Stby->Off During suspend or standby mode, the monitor will shut
down.
All Modes ->Off The monitor is turned off during doze, standby, or sus-
pend mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Supported Initial display power management signaling.
Modem Use IRQ
This setting names the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
Setting options: 3, 4, 5, 7, 9, 10, 11, AUTO.
Hot Key Function As
This setting specifies the function of the preset hot key. Setting options:
Disable, Power Off, Suspend.
HDD Off After
When enabled and after the set time of system inactivity, the hard disk drive
will be powered down while all other devices remain active. The settings are:
Disable, 1~15 Min.
Power Button Override
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state. The settings are: Delay 4 Sec, Instant Off.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
Kap3_6547v1.1.P65 05.02.02, 09:3420