Preface 970A SLI Krait Edition Motherboard G52-76931XL
Copyright Notice Preface The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks in this manual are properties of their respective owners. ￭￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
MSI+ is a smart web gadget that works as a shopping navigator and provides specs comparison for IT buyers. With a simple tap of the smartphone, you'll efficiently locate your ideal products from a wide variety of choices and, if product details are required, you may easily download user manuals within minutes. Better yet, the power calculator provides accurate estimates of power unit capacity for DIY users.
Safety Instructions ￭￭ Always read the safety instructions carefully. ￭￭ Keep this User’s Manual for future reference. Preface ￭￭ Keep this equipment away from humidity. ￭￭ Lay this equipment on a reliable flat surface before setting it up. ￭￭ The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. ￭￭ Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Radiation Exposure Statement Preface This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
Battery Information Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH Preface To protect the global environment and as an environmentalist, MSI must remind you that...
ESPAÑOL Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida.
TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Preface Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
日本JIS C 0950材質宣言 日本工業規格JIS C 0950により、2006年7月1日以降に販売される特定分野の電気お よび電子機器について、製造者による含有物質の表示が義務付けられます。 Preface http://www.msi.com/html/popup/csr/cemm_jp.html http://tw.msi.com/html/popup/csr_tw/cemm_jp.html India RoHS This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.
▍▍Contents Chapter 1 Getting Started ���������������������������������������������������������������������������1-1 Preface Packing Contents ������������������������������������������������������������������������������������������������� 1-2 Optional Accessories ������������������������������������������������������������������������������������������� 1-2 Assembly Precautions ������������������������������������������������������������������������������������������ 1-3 Motherboard Specifications �������
Motherboard Installation ��������������������������������������������������������������������������������������� 2-5 Power Connectors Installation ����������������������������������������������������������������������������� 2-7 Front Panel Connector Installation ��������������������������������������������������������������������� 2-10 JFP1 Connector Installation ������������������������������������������������������������������������� 2-10 Front Panel Audio Connector Installation �������������������������
Chapter 1 Getting Started Thank you for choosing the 970A SLI Krait Edition Series (MS-7693 v5.X) ATX motherboard. The 970A SLI Krait Edition Series motherboards are based on AMD® 970 & SB950 chipset for optimal system efficiency. Designed to fit the advanced AMD® AM3/ AM3+ processor, the 970A SLI Krait Edition Series motherboards deliver a high performance and professional desktop platform solution.
Packing Contents SOCKET AM3 Motherboard Drivers & Utilities Disc Motherboard User Guide Chapter 1 SATA Cable Optional Accessories USB 3.0 Bracket M-Connector * These pictures are for reference only and may vary without notice.
■■The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ■■Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component. ■■Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
Motherboard Specifications Chapter 1 CPU Support ■■Supports AMD® FXTM/ PhenomTM II/ AthlonTM II and SempronTM processors for the AM3/ AM3+ socket Hypertransport ■■HyperTransport™ 3.0, supports up to 4.8 GT/s Chipset ■■AMD® 970 & SB950 Memory Support ■■4x DDR3 memory slots supporting up to 32GB ■■Supports DDR3 2133(OC)/ 1866/ 1600/ 1333/ 1066 MHz ■■Dual channel memory architecture Expansion Slots ■■2x PCIe 2.0 x16 slots -- PCI_E2 supports up to PCIe 2.0 x16 speed -- PCI_E4 supports up to PCIe 2.
■■1x 24-pin ATX main power connector ■■1x 8-pin ATX 12V power connector ■■6x SATA 6Gb/s connectors ■■3x USB 2.0 connectors (supports additional 6 USB 2.0 ports) ■■1x USB 3.0 connector (supports additional 2 USB 3.
Software ■■Drivers ■■MSI -- Command Center -- Live Update 6 -- Fast Boot ■■7-ZIP ■■Norton Internet Security Solution Form Factor ■■ATX Form Factor ■■12 in. x 9.6 in. (30.5 cm x 22.4 cm) Chapter 1 For the latest information about CPU, please visit http://www.msi.com/cpu-support/ For more information on compatible components, please visit http://www.msi.
Connectors Quick Guide DIMM4 DIMM3 DIMM2 DIMM1 CPUFAN JPWR2 SYSFAN2 SOCKET AM3 Chapter 1 CPU Socket Back Panel JPWR1 PCI_E1 SYSFAN1 PCI_E2 SATA1 SATA2 PCI_E3 SATA5_6 JCI1 PCI1 SATA3_4 PCI_E4 JBAT1 JFP2 PCI2 JUSB4 JFP1 JAUD1 JUSB3 JCOM1 JUSB2 JTPM1 JUSB1 1-7 Getting Started
Connectors Reference Guide Chapter 1 Port Name Port Type Page Back Panel I/O Ports 1-9 CPU AM3/ AM3+ Socket 1-11 CPUFAN,SYSFAN1~2 Fan Power Connectors 1-20 DIMM1~4 DDR3 Memory slots 1-14 JAUD1 Front Panel Audio Connector 1-24 JBAT1 Clear CMOS Jumper 1-25 JCI1 Chassis Intrusion Connector 1-23 JCOM1 Serial Port Connector 1-24 JFP1, JFP2 System Panel Connectors 1-21 JPWR1~2 ATX Power Connectors 1-16 JTPM1 TPM Module Connector 1-23 JUSB1～3 USB 2.
Back Panel Quick Guide LAN Port PS/2 Mouse Port USB 2.0 Port USB 2.0 Port Line-In RS-Out USB 3.1 Port Line-Out CS-Out USB 2.0 Port Mic SS-Out ▶▶PS/2 Mouse/ Keyboard Port The PS/2® mouse/ keyboard DIN connectors are for PS/2® mouse/ keyboard. ▶▶USB 2.0 Port The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other USB 2.0-compatible devices. ▶▶USB 3.1 Port USB 3.1 port is backward-compatible with USB 3.0/ 2.0 devices.
▶▶LAN Port The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN). LED LINK/ACT LED SPEED LED Link/ Activity LED Speed LED LED Status Description Off No link Yellow Linked Blinking Data activity Off 10 Mbps connection Green 100 Mbps connection Orange 1 Gbps connection Chapter 1 ▶▶Audio Ports These connectors are used for audio devices. ■■ Line in: Used for connecting external audio outputting devices. ■■ Line out: Used as a connector for speakers or headphone.
CPU (Central Processing Unit) Introduction to AM3/ AM3+ CPU Chapter 1 The surface of the CPU has a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. Golden triangle is the Pin 1 indicator Important Overheating Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating.
CPU & Cooler Installation When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion. Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & motherboard. 1. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree angle. 2.
5. Locate the CPU fan connector on the motherboard. 6. Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first. CPU fan connector Chapter 1 SOCKET AM3 7. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it. 8. Fasten down the lever. 9. Attach the CPU Fan cable to the CPU fan connector on the motherboard.
Memory These DIMM slots are used for installing memory modules. SOCKET AM3 Chapter 1 DIMM1 DIMM2 DIMM3 DIMM4 Video Demonstration Watch the video to learn how to install memories. http://youtu.be/76yLtJaKlCQ Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data with two data bus channels simultaneously. Enabling Dual-Channel mode can enhance system performance. The following illustrations explain the population rules for Dual-Channel mode.
Mounting Screw Holes Chapter 1 SOCKET AM3 The I/O ports should be facing toward the rear of the computer case. They should line up with the holes on the I/O backplate. When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that came with the computer case, please replace it with the I/O backplate that came with the motherboard package.
Power Supply Video Demonstration Watch the video to learn how to install power supply connectors. http://youtu.be/gkDYyR_83I4 JPWR1~2: ATX Power Connectors JPWR2 d n u d ro un nd .G ro u d 4 .G ro un 3 .G ro 2 .G 1 Chapter 1 These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and firmly press the cable into the connector.
Expansion Slots This motherboard contains numerous slots for expansion cards, such as discrete graphics or audio cards. PCI_E1~4: PCIe Expansion Slots The PCIe slot supports the PCIe interface expansion card. Chapter 1 PCIe x16 Slot PCIe x1 Slot PCI1~2: PCI Expansion Slots The PCI slot supports additional LAN, SCSI, USB, and other add-on cards that comply with PCI specifications.
Video/ Graphics Cards If available, this motherboard takes advantage of the CPU’s integrate graphics processor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Adding on one or more discrete video cards will significantly boost the system’s graphics performance. For best compatibility, MSI graphics cards are recommended. Video Demonstration Chapter 1 Watch the video to learn how to install a graphics card on PCIe x16 slot with butterfly lock. http://youtu.
Internal Connectors SATA1~6: SATA Connectors This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray). Video Demonstration SOCKET AM3 Chapter 1 Watch the video to learn how to Install SATA HDD. http://youtu.be/RZsMpqxythc SATA1 SATA2 SATA6 SATA5 SATA4 SATA3 Important • Many SATA devices also need a power cable from the power supply.
CPUFAN,SYSFAN1~2: Fan Power Connectors The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector. CPUFAN d n u ro 2V or l .
JFP1, JFP2: System Panel Connectors These connectors connect to the front panel switches and LEDs. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the MConnector into the motherboard. Video Demonstration Watch the video to learn how to Install front panel connectors. http://youtu.be/DPELIdVNZUI ake r zer 2 .+ 8 .6 .+ 4 . Buz Chapter 1 Spe D D in E LE P rL d o e n .
JUSB1～3: USB 2.0 Expansion Connectors This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others. d C un + .N o 1 0 r B 1 .G S B1 8 U . S 6 U C . 4 VC . 2 SOCKET AM3 in P nd o u + .N r o 0 9 .G SB 07 .U B S 5 .U CC 3 .V 1 Chapter 1 Important Note that the VCC and GND pins must be connected correctly to avoid possible damage. JUSB4: USB 3.0 Expansion Connector The USB 3.0 port is backwards compatible with USB 2.
JCI1: Chassis Intrusion Connector This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will flash on screen. To clear the warning, you must enter the BIOS utility and clear the record. SOCKET AM3 Chapter 1 U R T nd IN o .C ru 1 .G 2 JTPM1: TPM Module Connector This connector connects to a TPM (Trusted Platform Module).
JCOM1: Serial Port Connector This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs. You can attach a serial device. in P o .N S 0 T R 1 .C S 8 D R . 6 T .D N 4 SI . 2 SOCKET AM3 I S d .R T n 9 . R r ou T 7 .G U 5 SO C D . 3 .D 1 Chapter 1 JAUD1: Front Panel Audio Connector This connector allows you to connect the front audio panel located on your computer case. ct te e D e n o n h io P ct d e a e in et .H P D 0 o 1 .N IC d 8 M n . C 6 .N ou 4 Gr .
Jumper JBAT1: Clear CMOS Jumper There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM. Chapter 1 SOCKET AM3 Keep Data Clear Data Important You can clear the CMOS RAM by shorting this jumper while the system is off.
Drivers and Utilities After you install the operating system you will need to install drivers to maximize the performance of the new computer you just built. MSI motherboard comes with a Driver Disc. Drivers allow the computer to utilize your motherboard more efficiently and take advantage of any special features we provide. You can protect your computer from viruses by installing the bundled security program. The bundle also includes a variety of powerful and creative utilities.
Chapter 2 Quick Installation This chapter provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code. Important The diagrams in this chapter are for reference only and may vary from the product you purchased.
CPU Installation 1 2 3 4 Chapter 2 5 Quick Installation 2-2
Chapter 2 6 7 2-3 Quick Installation
Memory Installation http://youtu.
Motherboard Installation Chapter 2 1 2 2-5 Quick Installation
3 Chapter 2 Quick Installation 2-6
Power Connectors Installation 1 Chapter 2 http://youtu.
3 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M Chapter 2 Quick Installation 2-8
SATA HDD Installation http://youtu.
Front Panel Connector Installation JFP1 Connector Installation 88 E6 I MS 4 MC 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 Chapter 2 88 E6 I MS 4 MC 88 E6 I MS 4 MC 88 E6 I MS 4 MC Front Panel Audio Connector Installation 88 E6 SI M C4 M 88 E6 SI M C4 M 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M Quick Installation 2-10 POWER SW REST SW POWER LED PWR_SWPWR_SW+ FP PWR/SLP FP PWR/SLP HD_LED+ HD_LEDRST_SWRST_SW+ RSVD_DNU HD_LED+ HD_LED
Peripheral Connector Installation USB2.0 Connector Installation or US B US B 88 E6 SI M C4 M 88 E6 SI M C4 M 8 E68 MSI MC4 8 E68 MSI MC4 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 88 E6 SI M C4 M USB3.
Graphics Card Installation http://youtu.
3 Chapter 2 4 5 2-13 Quick Installation
Chapter 3 BIOS Setup CLICK BIOS is a revolutionary UEFI interface that allows you to setup and configure your system for optimum use. Using your mouse and keyboard, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version and the BIOS version. Users can import and export parameter data for backup or for sharing with friends.
Entering Setup The default settings offer the optimal performance for system stability in normal conditions. You may need to run the Setup program when: ■■ An error message appears on the screen during the system booting up, and requests you to run SETUP. ■■ You want to change the default settings for customized features. Important • Please load the default settings to restore the optimal system performance and stability if the system becomes unstable after changing BIOS settings.
Overview After entering BIOS, the following screen is displayed. Temperature monitor Language System information Boot device priority bar Virtual OC Genie Button BIOS menu selection BIOS menu selection ▶▶BIOS menu selection The following options are available: ■■ SETTINGS - Uses this menu to specify the parameters for chipset and boot devices. ■■ OC - This menu contains the frequency and voltage adjustments.
▶▶Virtual OC Genie Button Enables or disables the OC Genie function by clicking on this button. When enabled, this button will be light. Enabling OC Genie function can automatically overclock with MSI optimized overclocking profile. Important We recommend that you do not to make any modification in OC menu mode and do not to load defaults after enabling the OC Genie function. ▶▶Menu display This area provides BIOS setting items and information to be configured.
Operation You can control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations.
SETTINGS System Status ▶▶System Date Sets the system date. Use tab key to switch between date elements. The format is . Day of the week, from Sun to Sat, determined by BIOS. Read-only. The month from Jan. through Dec. The date from 1 to 31 can be keyed by numeric function keys. The year can be adjusted by users. ▶▶System Time Sets the system time. Use tab key to switch between time elements. The time format is .
Advanced ▶▶PCI Subsystem Settings Sets PCI Express interface protocol and latency timer. Press to enter the sub-menu. ▶▶PCI Latency Timer [32] Sets latency timer of PCI interface device. [Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks] ▶▶ACPI Settings Sets ACPI parameters of onboard power LED behaviors. Press to enter the sub-menu. ▶▶ACPI Standby State This item specifies the power saving modes for ACPI function.
▶▶SATAX Hot Plug [Disabled] Allows user to enable or disable the SATA hot plug support. This item will appear when the “SATA Mode” set to [AHCI]. [Enabled] Enables hot plug support for the SATA ports. [Disabled] Disables hot plug support for the SATA ports. ▶▶HD Audio Controller [Enabled] Enables or disables the onboard High Definition Audio controller. ▶▶HPET [Enabled] Enables or disables the HPET (High Precision Event Timers) support.
▶▶EuP 2013 [Disabled] Enables or disables the system power consumption according to EuP2013 regulation. [Enabled] Optimize the system power consumption according to EuP 2013 regulation. [Disabled] Disables this function. Note: When enabled, the system will not support RTC wake up event functions. ▶▶Restore after AC Power Loss [Power Off] Sets the system behaviors while encountering the AC power loss. [Power Off] Leaves the system in power off state after restoring AC power.
▶▶Wake Up Event By [BIOS] Selects the wake up event by BIOS or operating system. [BIOS] Activates the following items, and use these items to set the wake up events. [OS] The wake up events will be defined by OS. ▶▶Resume By RTC Alarm [Disabled] Disables or enables the system wake up by RTC Alarm. [Enabled] Enables the system to boot up on a scheduled time/ date. [Disabled] Disables this function. ▶▶Date (of month) Alarm/ Time (hh:mm:ss) Alarm Sets RTC alarm date/ Time.
▶▶Boot Mode Select [LEGACY+UEFI] Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement. This item will become unselectable and will be configured automatically by BIOS when “Windows 8/ 8.1 Feature” is enabled. [UEFI] Enables UEFI BIOS boot mode support only. [LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot. ▶▶FIXED BOOT ORDER Priorities Sets device priority for system boot.
Save & Exit ▶▶Discard Changes and Exit Exit BIOS setup without saving any change. This it is used to abandon all changes and exit BIOS setup. ▶▶Save Changes and Reboot This item is used to save all changes and reboot the system. ▶▶Save Changes This item is used to save current changes. ▶▶Discard Changes This item is used to discard current all changes and restore to the previous values. ▶▶Restore Defaults This item is used to restore/ load all default values by the BIOS vendor.
OC Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware. • If you are unfamiliar with overclocking, we advise you to use OC Genie for easy overclocking. ▶▶Current CPU/ DRAM Frequency These items show the current frequencies of installed CPU and Memory. Read-only. ▶▶Adjust CPU Ratio [Auto] Sets the CPU ratio that is used to determine CPU clock speed.
▶▶CPU Core Control This item allows you to select the number of active processor cores. When set to [Auto], the CPU will operate under the default number of cores. ▶▶DRAM Frequency [Auto] Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed. ▶▶Adjusted DRAM Frequency Shows the adjusted DRAM frequency. Read-only. ▶▶DRAM Timing Mode [Auto] Selects the memory timing mode. [Auto] DRAM timings will be determined based on SPD (Serial Presence Detect) of installed memory modules.
▶▶Unlock CPU Core [Disabled] This item is used to unlock the CPU core. Please refer to the procedures below for CPU core unlocked in BIOS setup. Enter “OC” and set “Unlock CPU Core” to [Enabled]. Set “Adjust CPU-NB Ratio” and “HT Link Speed” to [x8]. Save changes and exit the BIOS setup. System restart. Fail Success You will see the “X4” (quad core) or “X2” (dual core for Sempron series only) during POST. AMD Phenom(tm) II X4 Processor Clear CMOS data.
▶▶CPU Specifications Press to enter the sub-menu. This sub-menu displays the information of installed CPU. You can also access this information menu at any time by pressing [F4]. Read only. ▶▶CPU Technology Support Press to enter the sub-menu. The sub-menu shows what the key features does the installed CPU support. Read only. ▶▶MEMORY-Z Press to enter the sub-menu. This sub-menu displays all the settings and timings of installed memory.
M-FLASH Important M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format only). ▶▶Save BIOS to storage Saves the current BIOS file to the USB flash disk. The USB flash disk drive should be in FAT32 format. ▶▶Update BIOS Selects a BIOS file in the USB flash disk (NTFS/ FAT32 format) to update the BIOS. Chapter 3 ▶▶Select one file to update BIOS Selects a BIOS file in the USB flash disk (NTFS/ FAT32 format) to update the BIOS. The system will reboot after updating.
OC PROFILE ▶▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press to enter the submenu. ▶▶Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Names the current overclocking profile. ▶▶Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Saves the current overclocking profile. ▶▶Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Loads the current overclocking profile. ▶▶Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Clears the current overclocking profile.
HARDWARE MONITOR Current Temperature & Speed information Temperature & Speed graphic display Fan control field Voltage display ▶▶Current Temperature & Speed information Shows the current CPU temperature, system temperature and fans' speeds. ▶▶Fan control field This motherboard provides a fan speed control feature call “Smart Fan Control”. Smart Fan Control automatically controls fan speed depending on the current CPU temperature and to keep it with a specific operating speed.
Please follow the description below to set the temperatures and fan speeds. a b c d e f ■■ a - Selects a fan you want to specify the speed. ■■ b - Checks this item to activate the following items for changing default values. ■■ c - Slides the Min and Max tabs to set the minimum and maximum temperatures. ■■ d - Slides the arrow symbol to set the minimum fan speed in percentage. ■■ e - Slides the arrow symbol to set the maximum fan speed in percentage.
Appendix A Realtek Audio The Realtek audio provides 10-channel DAC that simultaneously supports 7.1 sound playback and 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels.
Software Configuration Appendix A After installing the audio driver (see Chapter 1 - Driver and Utilities), the “Realtek HD Audio Manager” icon will appear at the notification area (lower right of the screen). You may double click the icon and the GUI will pop up accordingly. double click the icon It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel.
▶▶Volume Adjustment You can control the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar. ▶▶Application Enhancement The array of options will provide you a complete guidance of anticipated sound effect for both output and input device. ▶▶Jack status panel This panel depicts all render and capture devices currently connected with your computer.
Hardware Default Setting The following diagrams are audio back panel default setting.
Fro nt Cen ter &S ubw Rea oof r er ■■ Backpanel audio jacks to 8-channel speakers diagram Fro nt Cen ter S id A-5 &S eS ubw urro Rea oof r er und Realtek Audio Appendix A ■■ Backpanel audio jacks to 6-channel speakers diagram
Appendix B AMD RAID This appendix will assist users in configuring and enabling RAID functionality.
RAID Configuration Creating and deleting RAID set and performing other RAID setting up operations are done in the RAID BIOS. During boot-up, a screen similar to the one below will appear for about few seconds. Press to enter RAID Option ROM utility. Press to enter RAID Option ROM utility... Important Appendix B Be sure to enable the RAID function for SATA device in BIOS before configuring the RAID Option ROM Utility. The RAID Option ROM utility menu screen will appear.
Appendix B View Drives Assignments This window displays the model number, capacities and assignment of the drives physically attached to the SATA host adapter.
LD View / LD Define Menu (Creating RAID) The selection of the RAID configuration should be based upon factors including performance, data security, and the number of drives available. It is best to carefully consider the long-term role of the system and plan the data storage strategy. RAID sets can be created either automatically, or to allow the greatest flexibility, manually. 1. Press 2 on the Main Menu screen to enter the LD View Menu. Appendix B 2.
■■ Stripe Block Size, the default 64KB is best for most applications. RAID 0 or 10 only. ■■ Gigabyte Boundary, allows use of slightly smaller replacement drives. Appendix B 3. On the Drives Assignments window, use the arrow key to choose the hard drives which you want to make part of the LD, use the space key to change the assignment to “Y”. Then press [Ctrl+Y] to save the configuration. 4. A message will show, press [Ctrl + Y] to input a LD name as your desire or press any key to save default LD name.
6. The message will show up on the bottom, press any key to use maximum capacity or press [Ctrl-Y] to modify array capacity manually. Important • The default capacity is the full capacity of the selected hard drives. • If you allocate the first LD capacity manually, you can create second LD with remaining capacity of the selected hard drives. Appendix B 7. The LD creation is done, the screen shows the LD information as below. Press ESC key to the main screen. 8.
Delete LD Menu (Deleting RAID) 1. Press “3” on the main to enter the Delete LD Menu. Appendix B 2. Choose a LD No. you want to delete and press [Del] or [Alt+D] delete the RAID set. 3. On the next screen, a message will display to inform you, press “Ctrl+Y” to delete the RAID set or other key to abort it. Press “Ctrl+Y” to complete the deletion.
Installing Driver ■■ New Windows 7/ Windows 8/ Windows 8.1 Installation The following details the installation of the drivers while installing operating system. 1. During the operating system installation, after selecting the location to install Windows 7/ 8/ 8.1 click on “Load Driver” button to install a third party RAID driver. 2. When prompted, insert the “AMD RAID Driver” disk (optical drive or USB) and press Enter.
