Owner's Manual

3-22
MS-96C4 Server Board
DRAM Frequency
This setting specifies the DRAM frequency.
South Bridge Configuration
USB 1.1 Controller, USB 2.0 Controller
These settings configure the onboard USB controller and function.
PRO-NIC Controller
This setting disables/enables the Gigabit Ethernet controller.
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
failure or interrupt occurred.
PDF created with pdfFactory Pro trial version www.pdffactory.com