WindBOX Series MS-9A25 Fanless Box PC G52-9A251X1
▍ PREFACE Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
MS-9A25 Upgrade and Warranty Please be noticed that the memory, hard disk drive and optical disk drive preinstalled in the product users purchased may be upgradable or replaceable by user’s request. To learn more about upgrade limitation, please refer to the specification in the User’s Manual. For any further information about the product users purchased, please contact the local dealer.
▍ PREFACE Safety Instructions ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ Always read the safety instructions carefully. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.
MS-9A25 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
▍ PREFACE WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that...
MS-9A25 ESPAÑOL MSI como empresa comprometida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida
▍ PREFACE TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
MS-9A25 ▍ Table of Contents Copyright Notice �����������������������������������������������������������������������������������������������������ii Trademarks ������������������������������������������������������������������������������������������������������������ii U.S.
Chapter 1 Overview Thank you for choosing the WindBOX, an excellent industrial computer system from MSI. The WindBOX eliminates the noise and the risk of fan’s failure by wide heatsink as fanless solution. Furthermore, it supports VESA wall-mount interface for various scenarios like digital signage, thin client, and POS with affordable expenditure, which not only meets the demand of Industrial applications but also fulfills the needs of companies, governments, and institutes for general application.
▍ OVERVIEW Packing Contents Power Adapter MS-9A25 System VESA Mount Plate User’s Manual Power Cord Wireless LAN Antenna Driver/Utility Disk ■ Please contact us immediately if any of the item is damaged or missing. ■ The picture is for your reference only and your packing contents may slightly vary depending on the model you purchased.
MS-9A25 System Overview Right Side View 2 1 3 4 6 5 7 Left Side View 8 9 10 1 Gigabit LAN Jack (Optional) 2 Gigabit LAN Jack 3 Headphone Jack (Green) 4 Microphone Jack (Pink) 5 USB Ports 9 11 12 The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You can connect a network cable to it. The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You can connect a network cable to it.
▍ OVERVIEW 1-4 6 DVI Port 7 Antenna Connector 8 Antenna Connector (Optional) The DVI (Digital Visual Interface) connector allows you to connect an LCD monitor. It provides a high-speed digital interconnection between the computer and its display device. To connect an LCD monitor, simply plug your monitor cable into the DVI connector, and make sure that the other end of the cable is properly connected to your monitor (refer to your monitor manual for more information.
MS-9A25 System Specifications Processor ■ Intel ATOM N270 1.6GHz FSB ■ 533MHz Chipset ■ North Bridge: Intel 945GSE chipset ■ South Bridge: Intel ICH7M chipset Memory ■ Single channel DDR2 533/667 MHz SO-DIMM, up to 2GB LAN ■ Gigabit Fast Ethernet by Intel 82574 GbE controller Video ■ Intel GMA950 graphic engine ■ Up to QXGA (2048 x 1536) resolution Audio ■ HDA Codec by Realtek ALC888 7.1 channel ■ Compliant with Azalia 1.
▍ OVERVIEW Power Supply ■ 40 watt power adapter with active PFC ■ Input: 100-240V~, 50-60Hz, 1.7A ■ Output: 20V 2.0A Dimension & Weight ■ 260 mm (W) X 180 mm (D) X 19 mm (H) ■ 1.
Chapter 2 System Setup This chapter provides you with the information on hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap before handling computer components. Static electricity may damage the components. Important • Always unplug the power cord before installing any components.
▍ System Setup Installation Tools A Phillips (crosshead) screwdriver and a flathead screwdriver, can be used to do most of the installation. Choose one with a magnetic head would be better. Pliers, can be used as an auxiliary tool to connect some connectors or cables. Forceps, can be used to pick up tiny screws or set up the jumpers. Rubber gloves, can prevent yourself from being incised and suffering the static charge.
MS-9A25 System Setup Step 1: Locate the VESA mount screw holes on the back of the LCD monitor. Step 2: Fasten the VESA mount plate to the monitor with the supplied screws.
▍ System Setup Step 3: Mount the system onto the VESA mount plate. Step 4: Tighten the thumbscrew at the bottom of the VESA mount plate to secure the system.
MS-9A25 Step 5: Locate the wireless LAN antenna connector and install the antenna. Step 6: Locate the signal cable of the monitor and connect one end of the cable to the DVI port of the system. You may need to get an adapter if the supplied signal cable isn’t DVI-interfaced. Step 7: Connect the other end of the signal cable to the monitor. Connect the monitor power cord to the monitor and to the power source.
▍ System Setup Step 8: Assemble the system power adapter and the power cord. Connect the power adapter to the system and then connect the power cord to the power source. Important We suggest that you connect the power adapter to your system first and then connect the power cord to the socket-outlet for safety concerns. Step 9: Turn on the system and enjoy it.
