User`s manual

Safety Instructions

Read the safety instructions carefully and thoroughly�

All cautions and warnings on the equipment or user’s manual should be

noted�

◙

Keep the User’s Guide that comes with the package for future reference�

Keep this equipment away from humidity and high temperature�

Lay this equipment on a reliable at surface before setting it up�

Make sure that the power voltage is within its safety range and has been

adjusted properly to the value of 100~240V before connecting the equipment

to the power outlet� Do not disable the protective earth pin from the plug�

The equipment must be connected to an earthed mains socket-outlet�

Always unplug the AC power cord before installing any add-on card or

module to the equipment�

Always disconnect the AC power cord or switch the wall socket o if the

equipment would be left unused for a certain time to achieve zero energy

consumption�

◙

The ventilator on the enclosure is used for air convection and to prevent the

equipment from overheating� Do not cover the ventilator�

Do not leave the equipment in an unconditioned environment with a storage

temperature above 60

C (140

F) or below 0

C (32

F), which may damage the

equipment�

NOTE: The maximum operating temperature is around 40

C�