Computer Computer Hardware User Manual

3-25
BIOS Setup
PC Health Status
This section shows the status of your CPU, fan, overall system status,
etc. Monitor function is available only if there is hardware monitoring
mechanism onboard.
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to Reset. The setting of the field will
automatically return to Enabled later. Settings: Enabled, Reset, Disabled.
CPU Fan Detection
When enabled, the system will automatically monitor the CPU fan during boot-
up. If it detects that the CPU fan is not rotating, the system will show an error
message on the screen and halt the boot-up process. The function is built with
CPU fan power connector (CFAN1) only and enables you to protect the CPU
form possible overheating problem. If you don’t connect the CPU fan to the
CPU fan power connector, we recommend disabling the feature. Settings:
Enabled, Disabled.
CPU/System Temperature, CPU/System Fan Speed, Vcore, +5.0V, +12.0V,
-12.0V, -5.0V, Battery, +5V SB
These items display the current status of all of the monitored hardware devices/
components such as CPU voltages, temperatures and all fans’ speeds.