User guide

Chapter 1
1-26
Getting Started

JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the

automatically boot into the operating system (OS) every time it is turned on. If you

Keep Data Clear Data
1 1
Important

Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.
ECO_SW1: ECO Button

performance. To enable ECO mode, set this button to ON while the system is in power

than usual. In addition, the PCI slot will be unavailable. To disable ECO mode, set this

ON OFF
Important
If you are using PCI expansion cards, do not enable ECO mode.