User guide

Chapter 3
BOIS Setup  BIOS Setup
Intel(R) Rapid Start Technology [Disabled]
Intel
®
Rapid Start Technology lets the system resume from sleep mode quickly.
This function is available when an SSD is installed.
[Enabled] Enables Intel Rapid Start Technology.
[Disabled] Disables Intel Rapid Start Technology.


This item will appear when “Intel(R) Rapid Start Technology” is enabled.
[Enabled] Allows the system to enter the sleep mode with Intel Rapid Start
Technology.
[Disabled] Disables this function.
Entry After [10 minutes]
Sets a timer for system to enter the sleep mode with Intel Rapid Start
Technology. This item will appear when “Intel(R) Rapid Start Technology” is
enabled. [Options: 1 minute ~ 120 minutes]
Active Page Threshold Support [Enabled]
Enables or disables to support Active Page Threshold when the Rapid Start

 
[Disabled] Disables this function.
Active Memory Threshold

when “Active Page Threshold Support” is enabled.
Important

Hybrid Hard Disk Support [Disabled]
Enables or disables the Intel Rapid Start Technology to support hybrid hard disk
drive.
[Enabled] Enables hybrid hard disk support.
[Disabled] Disables hybrid hard disk support.
RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled] Enables this function.
[Disabled] Disables this function.
RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.