User guide

Chapter 3
BOIS Setup  BIOS Setup
Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, and use these items to set the wake up
events.
[OS] The wake up events will be defined by OS.
Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.
Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second

Resume By PCI/ PCI-E Device [Disabled]
Disables or enables the system wake up by PCI/ PCI express device.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCIe device is detected. Note:


[Disabled] Disables this function.
Resume By USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity
of USB device is detected.
[Disabled] Disables this function.
Important
For MB with USB Power Jumpers, you will need to set the jumpers to enabled .

Disables or enables the system wake up by PS/2 mouse.
 
activity of PS/2 mouse is detected.
[Disabled] Disables this function.

Disables or enables the system wake up by PS/2 keyboard.
 
activity of any key on PS/2 keyboard is detected.
 
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.