User guide

Appendix B

B-8

Intel RAID

 Reset Disks to Non-RAID



volume and remove any RAID structures from the drives. The following screen

appears:

DISK / VOLUME INFORMATION

[ ]

4. Recovery Volume Options

5. Exit

RAID Volumes :



Physical Devices :



1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk

2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk

 

1. Create RAID Volume

2. Delete RAID Volume

Resetting RAID disk will remove its RAID structures

and revert it to a non-RAID disk.

[ ]

RESET RAID DATA

WARNING : Resetting a disk causes all data on the disk to be lost.

(This does not apply to Recovery volumes)

Select the disks that should be reset.



   

1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk

2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk

[ ]

MAIN MENU



sentence will appear below, and then press <Y> key to accept the selection.

Important



You will lose all data on the RAID drives and any internal RAID structures when you

perform this operation.



Possible reasons to “Reset Disks to Non-RAID” could include issues such as

