user manual

Hardware Setup
2-17
Power Saving Switch Connector: JGS1
Attach a power saving switch to this connector. Pressing the switch
once will have the system enter the sleep/suspend state. Press any key to wake
up the system.
IrDA Infrared Module Header: FPIR
This connector allows you to connect to IrDA Infrared modules and is
compliant with Intel
®
Front Panel I/O Connectivity Design Guide. You must
configure the setting through the BIOS setup to use the IR function.
Pin Signal
1NC
2NC
3 VCC5
4 GND
5 IRTX
6 IRRX
FPIR Pin Definition
JGS1
1 2
FPIR
5 6