CHAPTER 1 Preface
1-2 Preface Table of Content Preface Table of Content ............................................................................................................................ 1-2 Regulations Information............................................................................................................... 1-5 FCC-B Radio Frequency Interference Statement .................................................................... 1-5 FCC Conditions ........................................................
1-3 Preface Left Side View......................................................................................................................... 2-16 Rear Side View....................................................................................................................... 2-18 Bottom Side View ................................................................................................................... 2-20 Getting Started Power Management ...............................................
1-4 Preface Safely Remove Hardware ........................................................................................................... 3-31 BIOS Setup About BIOS Setup......................................................................................................................... 4-2 When to Use BIOS Setup......................................................................................................... 4-2 How to Run BIOS Setup........................................................
1-5 Preface Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1-6 Preface Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
1-7 Preface Safety Instructions Read the safety instructions carefully and thoroughly. Keep the User’s Guide that All cautions and warnings on the comes with the package for equipment or user’s manual future reference. should be noted. Keep this equipment away from Lay this equipment on a stable humidity and high temperature. surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings.
1-8 Preface Place the power cord in a way that people are unlikely to step on it. Do not place anything on top of the power cord. Always unplug the power cord before inserting any add-on card or module. To prevent explosion caused by When installing the coaxial cable improper battery replacement, to the TV Tuner, it is necessary use the same or equivalent type to ensure that the metal shield is of battery recommended by the reliable connected to protective manufacturer only.
1-9 Preface Safety Guideline for Using Lithium Battery (English) CAUTION: Danger of explosion if battery is incorrectly replaced. recommended by the equipment manufacturer. Replace only with the same or equivalent type Discard used batteries according to manufacturer’s instructions. (French) (Français) ATTENTION: II y a danger d’ex;losion s’il y a remplacement incorrect de la batterie. uniquement avec une batterie du meme type ou d’un type équivalent recommandé par le constructeur.
1-10 Preface üreticinin talimatlarına göre degerlendiriniz. (Greek) (Ελληνικά) ΠΡΟΣΟΧΗ: Κίνδυνος έκρηξης εάν η μπαταρία τοποθετηθεί λανθασμένα. Να αντικαθιστάτε μόνο με τον ίδιο ή αντίστοιχο τύπο με αυτό που συνιστά ο κατασκευαστής του εξοπλισμού. Να απορρίπτετε τις χρησιμοποιημένες μπαταρίες ως απορρίμματα σύμφωνα με τις οδηγίες του κατασκευαστή. (Polish) (Polski) OSTRZEŻENIE: Nieprawidłowa wymiana może spowodować eksplozję baterii.
1-11 Preface 권장하는 것과 동일하거나 동등한 배터리로만 교체하십시오. 사용한 배터리는 제조업체의 지침에 따라 폐기하십시오. (Vietnam) (Tieng Viet) LƯU Ý: Thay thế pin không tương thích có thể dẫn đến nguy cơ bị nổ. Chỉ thay thế bằng pin cùng loại hoặc loại tương ứng khuyên dùng bởi nhà sản xuất thiết bị. Vứt bỏ pin đã sử dụng theo hướng dẫn của nhà sản xuất.
1-12 Preface (Swedish) (Svenska) VARNING: Explosionsfara vid felaktigt batteribyte. typ som rekommenderas av apparattillverkaren. Använd samma batterityp eller en ekvivalent Kassera använt batteri enligt fabrikantens instruction. (Finnish) (Suomi) VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. valmistajan suosittelemaan tyyppiin. Vaihda paristo ainoastaan Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
1-13 Preface (Estonia) (Eesti) ETTEVAATUST! Plahvatusoht, kui aku on valesti paigaldatud. Asendage ainult sama või tootja poolt soovitatud võrdväärse akuga. Hävitage kasutatud aku vastavalt tootja juhistele. ()ﻓﺎرﺳ ﻲ (Persian) ﺗﻨﻬﺎ از ﺑﺎﺗﺮﻳﻬﺎﯼ ﭘﻴﺸﻨﻬﺎدﯼ ﺷﺮﮐﺖ ﺗﻮﻟﻴﺪ ﮐﻨﻨﺪﻩ، در ﺻﻮرت ﺗﻌﻮﻳﺾ ﺑﺎﺗﺮﯼ. اﺣﺘﻤﺎل اﻧﻔﺠﺎر ﺑﺎﺗﺮﯼ وﺟﻮد دارد، در ﺻﻮرت ﻋﺪم ﻧﺼﺐ و ﺟﺎ ﮔﺬارﯼ ﺻﺤﻴﺢ ﺑﺎﺗﺮﯼ:اﺧﻄﺎر . از دور اﻧﺪاﺧﺘﻦ ﺑﺎﺗﺮﯼ ﺧﻮددارﯼ ﮐﻨﻴﺪ و ﺑﺮ ﻃﺒﻖ راهﻨﻤﺎﻳﯽ ﺷﺮﮐﺖ ﺗﻮﻟﻴﺪ ﮐﻨﻨﺪﻩ ﻋﻤﻞ ﻧﻤﺎﻳﻴﺪ.
1-14 Preface (German) (Deutsch) Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden, die sich auf 13.August, 2005 wirken. Und der Hersteller von bedeckt Elektronik-Altgeräte gesetzlich zur gebrachten Produkte am Ende seines Baruchbarkeitsdauer zurückzunehmen.
1-15 Preface (Greek) (Ελληνικά) Σύμφωνα με την Οδηγία 2002/96/ΕΚ της Ευρωπαϊκής Ένωσης («ΕΕ») περί Απόρριψης Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (WEEE), η οποία λαμβάνει ισχύ στις 13 Αυγούστου 2005, τα προϊόντα «ηλεκτρικού και ηλεκτρονικού εξοπλισμού» δεν είναι δυνατόν να απορριφθούν πλέον ως κοινά απορρίμματα και οι κατασκευαστές κεκαλυμμένου ηλεκτρονικού εξοπλισμού είναι υποχρεωμένοι να πάρουν πίσω αυτά τα προϊόντα στο τέλος της ωφέλιμης ζωής τους.
1-16 Preface 文规定「电机电子设备产品」不可再以都市废弃物处理，且所有相关电子设备制造商，均须在产品使用寿命结束后进行回 收。 (Japanese) (日本語) 2005 年 8 月 13 日以降に EU 加盟国を流通する電気・電子製品には WEEE 指令によりゴミ箱に×印のリサ イクルマークの表示が義務づけられており、廃棄物として捨てることの禁止とリサイクルが義務づけられています。 (Korean) (한국어) 2005 년 8 월 13 일자로 시행된 폐전기전자제품에 대한 유럽연합("EU") 지침, 지침 2002/96/EC 에 의거하여, "전기전자제품"은 일반 쓰레기로 폐기할 수 없으며 제품의 수명이 다하면 해당 전자제품의 제조업체가 이러한 제품을 회수할 책임이 있습니다.
1-17 Preface odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. (Netherlands) (Nederlands) De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus..
1-18 Preface (Slovak) (Slovenčina) Na základe smernice Európskej únie („EU“) o elektrických a elektronických zariadeniach číslo 2002/96/ES, ktorá vstúpila do platnosti 13. augusta 2005, výrobky, ktorými sú „elektrické a elektronické zariadenia” nesmú byť zneškodňované spolu s komunálnym odpadom a výrobcovia patričných elektronických zariadení sú povinní takéto výrobky na konci životnosti prevziať naspäť.
1-19 Preface 2002/96/EC, koja je na snazi od 13. kolovoza 2005., "električni i elektronički uređaji" se ne smiju više bacati zajedno s kućnim otpadom i proizvođači su obvezni zbrinuti takve proizvode na kraju njihovog životnog vijeka. (Estonia) (Eesti) Vastavalt Euroopa Liidu ("EL") direktiivile 2002/96/EÜ (elektri- ja elektroonikaseadmete jäätmete kohta), mis jõustus 13.
1-20 Preface Optical Drive Device Notice CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to disassemble the enclosure.
CHAPTER 2 Introductions
2-2 Introductions Congratulations on becoming an user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a delightful and professional experience in using notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this notebook.
2-3 Introductions Chapter 4, BIOS Setup, provides information on BIOS Setup program and allows you to configure the system for optimum use. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future.
2-4 Introductions Specification Physical Characteristic Dimension 247.5 (W) x 374 (D) x 35 (H) mm Weight 2.5KG CPU Processor Type Intel® PBGA 478 pin Support Processor Intel® Merom Core 2 Duo / Penryn processor (45nm) L2 Cache 3MB/ 6MB FSB Speed 1066/ 800/ 533Mhz (optional) Special Notification The actual processor preinstalled in the notebook depends on the model you purchased. Please contact the local dealer for detailed information.
2-5 Introductions Memory Technology DDR2 533/ 677/ 800 Mhz Memory DDR2 SO-DIMM X 2 slot Maximum up to 4GB (2048MB DDR2 SO-DIMMM x 2) (optional) 256/ 512/ 1024/ 2048 MB DDR2 SDRAM Power AC Adapter 65W, 19V Battery Type 6 cells (optional) RTC Battery Yes I/O Port Monitor (VGA) 15 pin D-Sub x 1 USB x 3 (USB version 2.0) Mic-in x1 Headphone Out x1 RJ45 x1 HDMI x 1 (optional) Card Reader x 1 (XD / SD/ MMC / MS) The supported memory cards may vary without notice.
2-6 Introductions Storage (Items listed here may vary depending on the model users purchased) HDD form factor 2.5”, 9.
2-7 Introductions WebCam CMOS (optional) Supported Software & BIOS USB Flash Boot Yes, USB floppy boot up DOS only BIOS Fast Boot Support --- Yes Others Kensington Lock Hole x1 Compliance WHQL Upgrade and Warranty Please be noticed that the memory, hard disk drive, and battery pack preinstalled in the product users purchased may be upgradable or replaceable by user’s request. To learn more about upgrade limitation, please refer to the specification in the User’s Manual.
2-8 Introductions Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the notebook shown in this section may vary from the actual one that users purchased. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook. 1 1. 2 2. 3 for reference only. 6 5 4 Power Button / Power LED 3.
2-9 Introductions 1. Webcam/ Webcam LED (optional) This built-in Webcam can be used for picture taking, video recoding or conferencing, and other interactive applications. Webcam LED indicator, next to the webcam, grows orange when webcam function is activated; LED goes out when this function is turned off. 2. Power Button / Power LED Power Button Press the power button to turn the notebook power ON and OFF. Power/ Power Saving function LED: Glowing blue when the notebook power is turned on.
2-10 Introductions P1 Windows Search Press this button to launch the Windows Search function. Press this button repeatedly to switch among these five different power ECO ECO Engine (Power Saving) saving modes – Gaming mode, Movie mode, Presentation mode, Office mode, and Turbo Battery mode provided by ECO Engine, or to turn this function off recurrently. Refer to the Power Management section in chapter 3 of this manual for the detailed information of this ECO Engine, Power Saving Function. 4.
2-11 Introductions Power On/ Off/ Suspend: Blinking blue when the system is in suspend mode. LED goes out when the system is turned off. Battery Status Glowing green when the battery is being charged. Glowing amber when the battery is in low battery status. Blinking amber if the battery fails and it is recommended to replace a new battery. Consult the local dealer for purchasing an equivalent type of battery recommended by the manufacturer.
2-12 Introductions 5. Touchpad This is the pointing device of the notebook. 6. Keyboard The built-in keyboard provides all the functions of a full-sized keyboard.
2-13 Introductions Front Side View 1 2 1. Consumer Infrared Receiver 2. Stereo Speakers 2 1. Consumer Infrared Receiver (CIR) (Optional) CIR refers to a wide variety of devices employing the infrared electromagnetic spectrum for wireless communications. 2. Stereo Speakers Give high quality sound blaster with stereo system and Hi-Fi function supported.
2-14 Introductions Right Side View 1 1. USB Port 2. Optical Drive Device 2 1. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 2. Optical Drive Device This notebook is equipped with an optical drive device. The actual device preinstalled in the notebook depends on the model you purchased.
2-15 Introductions Left Side View 1 2 3 1. 4 5 RJ-45 Connector 2. Audio Port Connectors 3. Ventilator 4. Card Reader 5. ExpressCard Slot 1. RJ-45 Connector The Ethernet connector is used to connect a LAN cable for network connection. 2. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function supported. Headphone: A connector for speakers or headphones. Microphone: Used for an external microphone.
2-16 Introductions 3. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 4. Card Reader The built-in card reader may support various types of memory card, such as MMC (Multi-Media Card), XD (eXtreme Digital), SD (Secure Digital), SDHC (SD High Capacity), MS (Memory Stick) or MS Pro (Memory Stick Pro) cards, and so on. Contact the local dealer for further and correct information and be noted that the supported memory cards may vary without notice. 5.
2-17 Introductions Rear Side View 1 2 4 5 3 6 7 1. Kensington Lock 2. Power Connector 3. USB Ports 4. TV-Tuner Antenna Connector 5. SIM Card Slot 6. VGA Port 7. HDMI Connector 1. Kensington Lock This notebook provides a Kensington Lock hole, which allows users to secure the notebook in place with a key or some mechanical PIN device and attached through a rubberised metal cable.
2-18 Introductions 4. TV-Tuner Antenna Connector (Optional) Notebook with Analog TV tuner — plug the supplied TV-Tuner adaptor into the connector first, and then screw the TV cable at the other end of adaptor. Notebook with Digital TV tuner — simply plug the supplied TV Antenna into the connector. 5. SIM Card Slot (Optional) Insert the SIM card properly into the SIM Card Slot provided in the notebook for internet service. Contact your internet service provider for any internet connecting issue. 6.
2-19 Introductions Bottom Side View 1 2 3 1. Battery Lock/ Unlock Button 2. Battery Release Button 3. Battery Pack 1. Battery Lock/ Unlock Button Battery cannot be moved when the button is positioned on lock status. Once the button is slid to unlock position, the battery is removable. 2. Battery Release Button It is a bounce-back device as a preparation for releasing the battery pack. Slide it with one hand and pull the battery pack carefully with the other. 3.
CHAPTER 3 Getting Started
3-2 Getting Started Power Management ECO Engine -- Power Saving Function ECO Engine, the outstanding and unique power saving function, provides 5 different power saving modes – Gaming mode, Movie mode, Presentation mode, Office mode, and Turbo Battery mode, to extend the battery running time while performing different tasks with this notebook. Press the ECO quick launch button repeatedly to switch among these 5 different modes or to turn this ECO Engine, Power Saving Function off recurrently.
3-3 Getting Started Presentation Mode Select this mode while performing presentation applications. Office Mode Select this mode while dealing with office documentation tasks. Turbo Battery Mode Select this mode to maximize the battery running time. ECO Off Selected to disable ECO Engine.
3-4 Getting Started AC Adapter Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this notebook for the first time. When the AC adapter is connected, the battery is being charged immediately. Note that the AC adapter included in the package is approved for your notebook; using other adapter model may damage either the notebook or other devices attached to it. Connecting the AC Power 1. Unpack the package to find the AC adapter and power cord. 2.
3-5 Getting Started
3-6 Getting Started Battery Pack This notebook is equipped with a high-capacity Li-ion battery pack. The rechargeable Li-ion battery pack is an internal power source of the notebook. Be aware of that this battery pack may be damaged if users try to disassemble the battery pack on their own. Also, note that the limited warranty to the battery pack may also lose its efficacy when this battery pack is disassembled not by an authorized machinist.
3-7 Getting Started Releasing the Battery Pack It is always recommended to have another battery pack in reserve for enough power supply. Please contact your local dealer to purchase a battery pack that is compliant to your notebook. To remove the battery pack, following the steps below: 1. Make sure the notebook is turned off, and the AC power is disconnected. 2. Press the lock/unlock button to the unlocked position. 3. Locate the battery release button on the bottom side. 4.
3-8 3 Getting Started 2 5 4 4 5 6
3-9 Getting Started Replacing the Battery Pack To insert the battery pack, following the steps below: 1 1. Align and place the battery to the battery tray with correct orientation. 2 2. Press down the battery pack to fasten the battery pack in the battery tray. 3. Press the lock/ unlock button to the Lock position to make sure the battery pack is securely fastened.
3-10 Getting Started Using the Battery Pack Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. Only replace the main battery pack with the same or equivalent type of battery. Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above +60° C (+140° F). Do not temper with batteries. Keep away from the reach of children. Do not use rusty or damaged batteries.
3-11 Getting Started Charging the Battery Pack The battery pack can be recharged while it is installed in the notebook. Please pay attention to the following tips before recharging the battery: If a charged battery pack is not available, save your work and close all running programs and shut down the system or Save-to-Disk. Plug in an external AC/DC power source. You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process.
3-12 Getting Started Basic Operations If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips The notebook is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your notebook for a long period of time. Your work area should have enough illumination.
3-13 Getting Started 4 1. Keep your hands and feet with optimal comfort. 2. Adjust the angle and position of LCD 1 2 panel. 3. Adjust the desk’s height. 4. Sit straight and keep a good posture. 5. Adjust the chair’s height. 3 1 5 Having a Good Work Habit Have a good work habit is important if you have to work with your notebook for long periods of time; otherwise, it may cause discomfort or injury to you. Please keep the following tips in mind when operating. Change your posture frequently.
3-14 Getting Started Knowing the Keyboard This notebook provides a full-functioned keyboard. This keyboard can be divided into four categories: Typewriter keys, Cursor keys, Numeric keys and Function keys. Typewriter keys Numeric keys Cursor keys / The keyboard shown here may vary from the actual one, depending on which county users purchase the notebook.
3-15 Getting Started Typewriter Keys In addition to providing the major function of the keyboard, these typewrite keys also provide several keys for special purposes, such as [Ctrl,] [Alt,] and [Esc] key. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: Num Lock: Press this key to toggle the Num Lock on and off. When this function is activated, you can use the numeric keys that are embedded in the typewriter keys.
3-16 Getting Started Cursor Keys The four cursor (arrow) keys and [Home], [PgUp], [PgDn], [End] keys are used to control the cursor movement. Move the cursor left for one space. Move the cursor right for one space. Move the cursor up for one line. Move to the previous page. Move to the next page. Move to the beginning of the line (or document). Move the cursor down for one Move to the end of the line (or line. document).
3-17 Getting Started Function Keys Windows Keys You can find the Windows Logo key ( ) and one Application Logo key ( ) on the keyboard, which are used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu. For more information of the two keys, please refer to your Windows manual or online help. [Fn] Key Switch the display output + mode between the LCD, external monitor and both. Decrease the built-in + Enable or disable the + touchpad function.
3-18 Getting Started Knowing the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen and making selection with its two buttons. 1. Cursor Movement Area This pressure-sensitive area of the touchpad, allows you to place your finger on and control the cursor on the screen by moving one of your finger. 2.
3-19 Getting Started Using the Touchpad Read the following description to learn how to use the touchpad: Configuring the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons. In addition, you can change the size, shape, moving speed and other advanced features of the cursor on the screen.
3-20 Getting Started Drag and Drop You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap. Now, you can drag the selected item to the desired location by moving your finger on the touchpad, and then lift your finger from the touchpad to drop the item into place.
3-21 Getting Started About Hard Disk Drive Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage device. Therefore, it is usually used to install the operating system and software applications. To avoid unexpected data loss in your system, please backup your critical files regularly.
3-22 Getting Started Using the Optical Drive Device Your notebook is equipped with an optical drive device. The actual device preinstalled in your notebook depends on the model you purchased. DVD Combo Drive: This device allows you to read DVD and CD, and record CD format. Super Multi: Works as a multi-functional DVD Dual Drive and a DVD RAM Drive.
3-23 Getting Started Inserting the Disk The following general instructions procedure when describe the operating the 2 optical storage device: 1. Confirm that the notebook is turned on. 3 2. Press the eject button on the panel and the disk tray will slide out partially. 3. 4 Gently pull the tray out until fully extended. 4. 1. Confirm that the disk is placed correctly securely in the Place your disk in the tray with its label facing up.
3-24 Getting Started Removing the Disk Follow the instructions below to remove the 6 disk that is placed in the optical storage device: 6. Press the eject button on the drive’s panel and the disk tray will slide out 7 partially. 7. Gently pull the tray out until fully extended. 8. 8 Hold the disk by its edge with your fingers and lift it up from the tray. 9 9. Push the tray back into the drive.
3-25 Getting Started Connecting the External Devices The I/O (input/output) ports on the notebook allow you to connect peripheral devices. All devices listed here are for reference only. Connecting the Peripheral Devices Connecting the USB devices This notebook provides USB ports for connecting various USB devices, such as mouse, keyboard, digital camera, webcam, printer, and external optical storage device, etc...
3-26 Getting Started Connecting the External Display Devices This notebook provides a VGA port for connecting a larger display with higher resolution. The 15-pin-D-sub VGA port allows users to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the notebook display.
3-27 Getting Started This notebook provides a HDMI port for connecting a larger display with higher resolution. HDMI (High Definition Multimedia Interface Support) is a new interface standard for PCs, displays and consumer electronics devices that supports standard, enhanced and high-definition video, plus multi-channel digital audio on a single cable. To connect the external display, make sure the notebook and the external display are both powered off, and then connect the display to the notebook.
3-28 Getting Started Connecting the Communication Devices Using the LAN The RJ-45 connector of the notebook allows you to connect the LAN (local area network) devices, such as a hub, switch and gateway, to build a network connection. For more instructions or detailed steps on connecting to the LAN, please ask your MIS staff or network manager for help.
3-29 Getting Started ExpressCard Installation This computer provides an ExpressCard slot. The new ExpressCard interface is smaller and faster than PC Card interface. The ExpressCard technology takes advantage of the scalable, high-bandwidth serial PCI Express and USB 2.0 interfaces. The following instruction provides you with a basic installation for the ExpressCard, including how to install and remove it. For more information, please refer to the manual of your ExpressCard. Removing the ExpressCard 1.
3-30 Getting Started Removing the ExpressCard 1 3 2 2 3 4 Installing the ExpressCard 6 5 5 4
3-31 Getting Started Safely Remove Hardware When any peripheral device is connected to the notebook, the Safely Remove Hardware icon will appear on the taskbar. Double-click the icon to bring up the Safely Remove Hardware dialog box. You can see all connected peripheral devices here. If you want to remove any of the devices, move the cursor to the device and click Stop. The diagram shown below is for reference only. Safely Remove Hardware Select the device you want to unplug or eject, and then click Stop.
CHAPTER 4 BIOS Setup
4-2 BIOS Setup About BIOS Setup When to Use BIOS Setup? You may need to run the BIOS Setup when: An error message appears on the screen during the system booting up and is requested to run SETUP. You want to change the default settings for customized features. You want to reload the default BIOS settings. How to Run BIOS Setup? To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
4-3 BIOS Setup Control Keys You can use only the keyboard to control the cursor in the BIOS Setup Utility. Press left arrow to select one Press right arrow to select one menu title. menu title. Press up arrow to select one item Press down arrow to select one under the menu title. item under the menu title. Increase the setting value or make changes. + Decrease the setting value or make changes. 1) Open the selected item to change setting options. 2) Bring up a sub-menu when available.
4-4 BIOS Setup BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus. Main Menu Show system overview information about BIOS version, CPU features, memory size and setting of system time and date. Advanced Menu Adjust the advanced settings, such as power consumption, USB/ PCI devices, of the notebook in order to achieve a better performance. Security Menu Install or clear the password settings for supervisor and user.
4-5 BIOS Setup Main Menu System Date This item allows you to set the system date. The date format is [day:month:date:year]. Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only). Month The month from 01 (January) to 12 (December). Date The date from 01 to 31. Year The year can be adjusted by users. System Time This item allows you to set the system time. The system clock will go on no matter you shut down the PC or get into sleep mode.
4-6 BIOS Setup System Information This item provides the information about the firmware, processor, and system memory.
4-7 BIOS Setup Advanced Menu Intel(R) SpeedStep(tm) tech. This item allows you to enable or disable Intel SpeedStep technology. When set to Disabled, the system always operates in a conserve power mode (the processor works at FSB400-600MHz or FSB533-800MHz).
4-8 BIOS Setup AHCI (Advanced Host Controller Interface) (Optional) Use this item to enable or disable the AHCI Mode. Disabled and Enabled. The default setting is Disabled.
4-9 BIOS Setup Security menu Change Supervisor Password When this item is selected, a message box shall appear on the screen as below: Enter New Password Type a maximum of eight-digit password and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. When the Supervisor Password is set, new items Change User Password and Password Check will be added in the menu.
4-10 BIOS Setup The Password Check item is used to specify the type of BIOS password protection that is implemented. Settings are described below: Setup The password is required only when users try to access to BIOS SETUP UTILITY. The password is required every time when the Notebook is Always powered on or when users try to access to BIOS SETUP UTILITY.
4-11 BIOS Setup Boot menu Boot Settings Configuration Configure settings during system boot. Boot Device Priority These items showing the sequence of boot devices where BIOS attempts to load the disk operating system.
4-12 BIOS Setup Exit menu Exit & Save Changes Save the changes you have made and exit the utility. Exit & Discard Changes Exit the utility without saving the changes you have made. Discard Changes Abandon your changes and reload the previous configuration before running the utility. Load Setup Defaults Select this item to load the default settings.
